fault codes

[blaza10]

hi guys does can someone tell me were to find fault code info
my ml 270 has just been serviced and now comes up (oil hi) is that temp or over filled
also my wifes slk230 comes up 4 d means nothing to me?

 

[Brian WH]

hi guys does can someone tell me were to find fault code info
my ml 270 has just been serviced and now comes up (oil hi) is that temp or over filled
also my wifes slk230 comes up 4 d means nothing to me?

Oil Hi means they have overfilled it. Return to garage and get them to rectify asap.

 

[Ian B Walker]

Brian you supprise me, not moving? or is that Shudes job for the day

 

[Brian WH]

Brian you supprise me, not moving? or is that Shudes job for the day

Oh go on then.

To the engine section with you.

 

[PAUL R]

hi guys does can someone tell me were to find fault code info
my ml 270 has just been serviced and now comes up (oil hi) is that temp or over filled

The short answer to your question on the ML is over filled (Yes).

HTH

 

[Flash]

The error code does indicate (as others ahve already susuggedted) that the oil level is too much and has been over fileld BUT sometimes if a car has been driven hard/thrashed around and taken around bends/corners at speed the sensor (s) can play up. I had that happen on one of my cars and a similar error came up (car had service 6months prior to the error) but coupel fo hpuirs later after engien was shut down and left parked for 1hrs all was fien an no error message...

I'm sure that the oil level has been overfilled as this error has come up immediately afterwards and as Brian has said get the garage to rectify this ASAP...