• The Forums are now open to new registrations, adverts are also being de-tuned.

Heater problems

wishihadamerc

Member
Joined
Dec 26, 2005
Messages
43
On my w124 200 the heater blows hot on the one side and cold on the other both dials set to hot some times both sides blow cold

Is the a way of bleeding the cooling system of air?

Si
 
Does your car have REST function on the re-circ buton. If so check the pump is working otherwise there may not be enough water circulating around the heater matrix.

To bleed the system run the engine with the filler cap off and keep squeezing the bottom radiator hose. Keep the expansion tank well filled.
Bleeding can take a while to do.
 
Possible faulty vacuum diaphram flap valves in heater or vacuum leak??
 

Users who are viewing this thread

Back
Top Bottom