Injectors

[srpj1]

Hi I'm going to put new seal and bolt on injector no.1 and have got the removal tool and cutting tool but need some sort of air pressure tool to screw into the glow plug hole to stop dirt etc getting into the system , please can anyone help or suggest something , thanks

 

[srpj1]

Hi I'm going to put new seal and bolt on injector no.1 and have got the removal tool and cutting tool but need some sort of air pressure tool to screw into the glow plug hole to stop dirt etc getting into the system , please can anyone help or suggest something , thanks

. Also I have a brake warning light on and it's link the hand brake light . But won't go off ?

 

[mersum1es]

Just buy regular air gun (I assume you have a compressor?) and put some duct tape around the pipe and stuck it in the glow plug hole?
http://www.worldofpower.co.uk/media...3525d08d6e5fb8d27136e95/s/i/sip02146-420x.jpg


Check the switch in hand brake pedal assembly.
Parking brake warning light not working - Page 2 - Mercedes-Benz Forum