Mercedes Vito Dualiner floor

[mougly84]

Hi all ive got a mercedes vito dualiner 6 seater but want to add 3rd row of seats ive got the seats and just bought floor rails.. Are the bolts or holes under the floor as standard... Ivd got the rubber matting as standard and dont really want to rip up and find that they not there ..

 

[zenman63]

How old is it?

Unlikely the holes are there anyway buy the only way is to lift the rear mat and look.
They can be fitted anyway.

 

[mougly84]

Its 2006 model... Will the holes be there or any other markings?

 

[zenman63]

No mate very unlikely they will be there.
Take up the mat and look with a light at the back for holes

 

[mougly84]

Thanks ile try it next week... You would think there would be some marks or holes there as the floors should be standard

 

[zenman63]

Mercedes give nothing away not even an extra wire or nut, before it's built a data card is used to build just what it takes for that build.

As you have seats you might just have the travel liner floor pan so if you remove the trim across the rear floor and lift enough to get a light in the holes will be clear to see if there there or not.

 

[mougly84]

Just got the floor up and yes your correct its just bog standard floor not traveliner. Gutted..
Nevermind will just make fitting the floor rails little harder

 

[zenman63]

If you use the search you will find my how to with factory finish.

Here you go
http://www.mbclub.co.uk/forums/interior/118707-vito-639-seats.html