• The Forums are now open to new registrations, adverts are also being de-tuned.

New Alloys for my CLK320

Glynforster

Member
Joined
Dec 29, 2012
Messages
32
Car
CLK320 2001
Just bought these alloys off Ebay hopefully will get them fitted on Tuesday on my next day off, does anyone know what model they would have been on originally???



image-3343123992.jpg

I will also be selling the old alloys if anyones interested let me know.
 
So you've bought some Merc Alloys without knowing what they came off and what offset they are?

Dya feel lucky Punk?

Do ya? :doh:
 
Look like SL or SLK wheels , what size are they ?
 
sinewave said:
So you've bought some Merc Alloys without knowing what they came off and what offset they are?

Dya feel lucky Punk?

Do ya? :doh:

Although they didn't know what car they came off it was a dealer and i sent my car details and they guaranteed they will fit.
 
What size are they and what offset ?

Are they staggered ?
 
Howard said:
Look like SL or SLK wheels , what size are they ?

Here is the description from Ebay:

SET OF 4 USED GENUINE 16" MERCEDES ALLOYS IN EXCELLENT CONDITION AS SHOWN WITH NO KERBING.
THESE ARE THE UPGRADE ALLOYS WITH WIDER REARS
FRONT WHEELS ARE 7X16 AND REARS ARE 8X16
FRONT TYRES ARE 2055516VR WANLI S-1008 AND HAVE JUST RECENTLY BEEN FITTED AND HAVE NEARLY FULL 7MM TREAD
REAR TYRES ARE 2255016
1 X GOODYEAR F1 WITH 3MM TREAD SLIGHTLY WORN ON INSIDE
1 X MILLENIUM WITH 3MM TREAD EVENLY WORN
REALLY NICE SET OF GENUINE MERCEDES ALLOYS/TYRES
FITMENT
MERCEDES SLK/CLK
MERCEDES C CLASS UP TO 2007

Cheers Glyn
 
Gonna need 4! I wouldn't want Wanlis on my pride and joy.:doh:

Haha ! Missed that !

My old w124 had Wanlis on it when I bought it , and had the same Wanlis on it when I sold it years later ! I just couldn't get them to wear out !

They were great for sliding out of junctions in the wet though ;)
 
Glyn.

It's Sunday tomorrow so to put ya mind at rest, jack up ya motor and remove a wheel, flip it over and look at the rear of it, you should see a stamp in the metal with a designation ET followed by a number like 35.

Then have a look at the wheels you've just bought for the same.

If ET's match or are close you should be fine, if not then U might be in trouble.
 
The wheels he's shown and linked to the specs of will fit just fine.
 
Heres a pic half way through swapping the alloys, i think they look a lot better.



image-1042037883.jpg



image-1946681472.jpg
 
They do look similar but wow, what a big difference!! Congrats.
 
A couple of pics now shes had a wash, im really happy with the look of the new Alloys.



image-384604572.jpg



image-3065387757.jpg
 

Users who are viewing this thread

Back
Top Bottom