Sprinter Radio Replacement

[Martintheshred]

Hi Guys
Hopefully some one can help me out. I am thinki of changing out the stock stereo that is in my 2014 Mercedes Sprinter 313 CDI for a double din Android unit. I believe it is called an Audio10 unit. I do know it is a double din unit with the telephone key pad on the right hand side. I have already got a facia plate and wiring harness adapter. When I took the radio out to check connections at the back I noticed that there is a white plug in the ISO plug can anyone help out with what these wires do? I have attached pictures to try to explain my confusion.

Does anyone know where I can get a decent workshop manual for this van as well?

Thanks in advance for any help
Martin
It is the White Connector on the bottom right here.

I was able to get the plug out of the iso connector and was able to take a picture of the wires coming out of it. any ideas?

 

[rls]

The white connector will be the aux input


Sent from my iPhone using Tapatalk

 

[Martintheshred]

The white connector will be the aux input


Sent from my iPhone using Tapatalk

So is that the Aux Audio In (connect Ipod via headphone jack) and usb in? and where do the the steering wheel controls connect?

 

[rls]

The steering controls are connected via the Canbus so not directly into the radio, the radio canbus is on pins 1 & 3 of the black 8 pin connector, the beige/brown one is the speakers


Sent from my iPhone using Tapatalk

 

[Martintheshred]

Hey thanks you have been a lot of help to me just one last question how are you numbering the pin's sorry if this sound's thick

 

[rls]

See the attached pic

Sent from my iPad using Tapatalk

 

[rls]

Note the CAN BUS on the drawing is pins 9&11, my previous post referred to the connector on its own which is pins 1&3!

Just wanted to avoid confusion


Sent from my iPad using Tapatalk

 

[Martintheshred]

Thanks I was going to ask about that most appreciated