Search results

Hi guys, Been a while since i ran Xentry on the old faithful Sprinter. Current have a 0.7a parasitic drain, so thought i'd hook up my PART_D to see if there was anything that may help pinpoint the draw. Amongst other things ( DPF related ) I have the following error : Error code 9020 - (OCP...

Hi guys, I have a module connector for the paramterisable module, i have one cable come loose and one exposing copper, i need to remove these 2 terminals to repair, i have spent well over 2 hours trying to remove just one of them, to no avail :( I have tried prising the little clip thing...

Hi guys, I have a 2008 Auto Sprinter 209 CDI, which is having some issues, it is a long story but to cut it short..... Last summer i went travelling Eastern Europe, whilst in Albania ( 40 degrees! ) i had a major auto gear malfunction. It turns out the wiring was melted and shorting as it was...

Hi guys, I am looking to replace my front discs and pads on my vito 110cdi Mk1 - I am wandering which caliper type i need to be purchasing for. From what i have read there are 2 types of caliper for this so not sure which pads i need. Is there a simple way to tell the difference by looking at...

Hi guys, The sliding door on my van is completely out of line. The rear of the door when closed doesn't pull in and there is a large spacing from the body of the van and rear of door, as shown below. The closest edge of the sliding door ( the side that meets with the passenger...

Hi guys, Thought i would tackle the heater blower as its snowing. Fan does not operate at all. I have checked fuse, this is fine. Are there any other fuses i should check other than the 30amp one? Anyway i removed the fan from underneath the passenger side dash ( UK model ) ...

Hi guys, I am looking to fit some standard speakers to the dash as the previous owner had ripped them out and stuck some crappy things on top of the dash! Not to fussed about anything powerful or bass heavy ( obviously not from a 10cm speaker anyway ) but any suggestions on something that...

Hi guys, Another thread i am afraid. While soaking my injectors i thought i had better get started on other stuff - first thing that comes to mind is a service part - the fuel filter - as suggested before it does look a bit manky and as i have no idea when it was last changed i guess i had...

Hi guys, I currently have limited tools and limited money. As some of you may know i am working on injectors on my Vito at the moment, but there are numerous other jobs i want to tackle as i am quite enjoying the challenge :) Can any of you recommend/link any decent socket sets that...

Hi guys, I thought it best i create a new thread about this newly discovered Black Death on my 2003 110CDI Vito. Hopefully there are some peeps that frequent these forums that can give me some advice/tips.. The current state of the injectors after a few hours of chipping away is as below ...

Hi guys, I'm new to the land of Vito, this is a 2003 Vito 110CDI ( mk1 ). The engine sounds quite loud to me, however i haven't got anything similar to compare it to. If one of you guys with experience could take a look at this video and tell me if you can hear anything out of place or...