bolts

Am having a set of Amg alloys refurb'd and they could do with new centre caps and bolts. Can anyone recommend the best place for this? Is it going to be a Main stealer only thing?

I'm looking to renew the brakes on my W203 200CDI. The Haynes manual (yeah, I know) says the caliper bolts are not to be reused and must be renewed as well. Is this necessary? I've never come across it on any other cars I've owned. If it is are they readily available from the usual places...

I recenly bought from another member a set of Ronal Carlsson wheels for my 2004 W209 CLK 320 cabriolet ( thanks matey they are in great condition). Today I finally had time to start to fit them and I seem to have a bolt issue. The standard MB bolts on the front do not go far enough in to hold...

Few months ago I've had an emergency on a motorway abroad - puncture.Cut the long story short I've broken 2 wheel spanners and 1 ratchet trying to undo the bolts there. Is this a common problem in Vito or even other models?:dk: Just want to find a solution if there's any...

I’ve just had my front wheels off to take a look see at the tyres, disks… and I noticed the security bolt was little more than hand tight on both fronts so I re-torqued all the wheels and found all the security bolts weren’t anywhere near the 110Nm spec!!! Is this common practice? :eek:

I've just bought a set of 16x8j et34 wheels from an R129 to use on my W124 estate, and was wondering whether the standard wheel bolts currently used on my standard 15s will work o.k? If anyone else is using wheels the same size on a w124 I'd be interested to hear your experiences, any...

A set of Locking Wheel Bolts suitable for Mercedes B class (late 2008) You will need to check to see which other models these will fit. Part number: B 66 47 0155 Complete with case. Please see photo for measurements. £20 inc Postage

My W203 will be treated to refurbed alloys in the near future, and I'm planning to replace the rusty wheel bolts at the same time. I recall RAD rust resistant bolts from AlloyWheelsDirect getting a mention before - anyone got a set and care to share their experience? Any alternatives I...

Went to do a trans fluid and filter change Saturday. Had read here the bolts sometimes snap and it's very often the one nearest the exhaust pipe, so I tried that one first. Snap! Bu99er. Going to be a drill out job so I'll let a garage do it on the ramps. Do you think a regular garage will...

hi guys ive been trying to source head bolts, but bought head bolts firstly from gsf , but went to fit them and they longer than the original. so travelled back to gsf to see what was wrong they are the right bolts . i tried explaining that they longer than the original ones and could either...

Hi all, I got a great deal on a set of 17" 5spoke AMG alloys and tyres from eBay yesterday, but upon trying to fit them, the bolts on my std 16" (horrific) alloys were too long. Apparently, the DCP offset on the bolts i have is too large and i need a shorter set of bolts, where the new...

Hello all, Ive got a 97 W202 with standard steel wheels atm. I've picked up some 18" AMG replicas off flebay for £150, they had just been sandblasted, so i primed them up and im just about to give them a lick of Gloss Black, on a silver car thought might look quite good. My question is...

Hi iv just bought some nice shiny 18s for my W202, i cant put them on till next month as i cant afford thr rubber untill pay day, but what i want to know is which locking bolts to get? M12 or M14? Also im guessing as mine has steel rims on it im gonna need all new wheel bolts? again what size...

Hi, can anyone recommend the best place to get a replacement "key" for OEM locking wheel bolts? The guys who fitted my winter tyres must have used an airgun to put the wheels on as the key has been shredded. My indy got the locking nuts off as part of a service so I'm back on normal bolts...

as topic 20x brand new shiney bolts for Mercedes, ideal for Toliman alloys and/or steel wheels £25 posted

Hi all.... it's been a long time since i've been on this forum. I now have another mecedes with a question. I'm repairing leaking injector seals. I bought a couple of new clamps and stretch bolts from MB but mine seems to have studs and nuts to secure the clamps. Does this sound correct or has...

I'm trying to find a set of wheel bolts that have s splined socket drive for my SL55. It's got SL65 two piece AMG IVs which use a 14mmX1.5mm pitch X 27mm long with a radiused or ball seat. I can find these for aftermarket wheels but these have a 60 degree taper seat. The standard Merc bolts look...

Hi All. I have 17" Ankka alloys on my 320cdi and ready to move to 18" Sport alloys. Can anyone please tell me if the bolts will be the same or would i have to get a new set. I am getting my tyres from etyres and need them fitted on my driveway and don,t want to hit this snag because the bolts...

All My car has those annoying long wheel bolts that are double the length of a normal one so the chrome caps sit flush with the wheels I have been looking for locking wheel bolts but I can only find short stem ones (Mercedes only sell these, McGuard, RAD etc are also short) and I have done a...

Hello, Anyone as the torque value for the 16 bolts that hold the manifold into the head on the E300TD 1997? Thank you. Olivier