gasket

Ihave a 1990 300CE and looks like the head gasket has gone south. Been leaky for a while but been running ok but now running badly so can't put it off any longer. Garages want a small fortune for the labour so not going to be an option. I'm quite familiar with engines and done a couple of...

Can anyone tell me how much a garage would charge for a Gearbox Sump Gasket replacement.

Could be a nice little car with the head gasket done and a little bit of work here and there: http://cgi.ebay.co.uk/1991-MERCEDES-300E-24-AUTO-SILVER_W0QQitemZ260135731329QQihZ016QQcategoryZ9855QQssPageNameZWDVWQQrdZ1QQcmdZViewItem Same engine as Adys if im not wrong :D

went to view a 1998 C240 Sport yesterday. only 70K Miles and in fantastic condition. Found 1 thing that worried me Took off the oil filler cap and found some traces of the the old "Mayo" Are these V6s prone to head gasket problems or is it likely to be condensation the car had...

Driving home from work this evening I first of all noticed the temp gauge climbing a bit quicker than normal and then a bit further into my journey white/grey smoke issuing from exhaust when standing or running downhill in gear with no pressure applied to accelerator pedal. The temp never got...

Hi guys, i'm here again asking for some advise. I think my head gasket has gone and would appreciate some advise from others before i take the head off to discover i've overlooked something simple. I have got loads of oil in my radiator expansion tank and i think the oil on the dipstick...

It sounds like one of my manifold gaskets is leaking. It is a big job? The gaskets are cheap - less than £10 for the set. Could this be a diy job?

Hi People, Notice recently that my Windscreen Washer and Coolant light were staying on so did the obvois and checked previous theads for similar symptoms. But no good tried all and failed, lights are still on. But also noticed that there was a lot of pressure building around the sensor...

MY MISTAKE: Im actually talking about the rocker cover gasket!?? Is this easy enough to do, any pitfalls? Thanks! Hi guys, I was wondering what the steps are to replace the head gasket on my 2.5-16. Im going to do it myself. Is there an idiots guide anyone can tell me of please...

I know that changing the headgaskets is the best solution but is it possible to just tighten the bolts in the correct order by say 1/8 th of a turn ? M104's tend to leak (to atmosphere only) on the rear right and the M111 at the front right in the timing chain area. The coolent is not normally...

I know that changing the headgaskets is the best solution but is it possible to just tighten the bolts in the correct order by say 1/8 th of a turn ? M104's tend to leak oil (to atmosphere only) on the rear right and the M111 at the front right in the timing chain area. The coolent is not...

Hi I started stripping the engine today to do the head gasket, everything was going quite well. Then i started loosening the head bolts and thought should that be loose see pic :eek: http://i50.photobucket.com/albums/f335/mondy688/broken1.jpg Does anyone know what this part is called? can...

Hi all well i was on my way home from work on friday and the car just didn't feel right struggling up hills and just pretty crap. So i thought change plugs leads etc. and then smoke poured out the back of the exhaust:crazy: . So did a compresion test and had low pressure in cylinder 5. I...

It looks like i need the head gasket replacing on my E320 Coupe W124 (3199cc engine M104). What is it going to cost me? Has anyone had the same work done? Can anybody recommend a merc specialist in the Leeds/Wakefield/Doncaster area? Should i look to do any other "service" work at this...

I was advised a little while back that the headgasket will need changing and after checking recently I think the time has come. I am tempted to do it myself as I really couldn't afford to let a garage do the work however I'm not that confident and don't want to take the plunge and the get...

Leaking oil badly, don't think it has blown though. What's the cost of a new gasket, or perhaps the seal around that may have gone. Should I worry? Cheers L :o

Don't know if anyone is interested in this ... maybe as a bit of a project, if it can be bought cheap enought, it might be worthwhile :) http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=10398&item=4556605212&rd=1

Hey all... Went to the dealer for a basic service and they reported the the head gasket is leaking at 'O/S/F corner area'. They said it was going to be a big/expensive job - approx 10hrs labour. Anyone able to advise on what i should do? Is it ok to leave it till it 'blows'...

Anyone know of any cheap repair specialists? My SL320 is leaking oil from the head gasket. thanks

Hi. I Have a 1996 SL320 and the head gasket is leaking oil. Does anyone know of a cheap specialist who will repair this, preferrably in London/Surrey area. thanks