installation

I had a genuine Mercedes iPod installation kit fitted just over 2 years ago to my W204 C180. Now it has started to play up. In front of me on the dash display it displays 'Please wait' with iPod/aux constantly flashing. There is no sound coming from the iPod anymore. I have tried two other...

Folks Looking to install an OTG on my '95 A124. Can anyone help with a known good OTG display and sensor. I know that sensor joins the subloom around the fuse box area, is the subloom between the engine bay and the speedo console present on late 124 cars, or do I need to cobble together...

Good evening I have been reading posts on here for a while but have now decided to join I also realise that this subject has been covered lots of times and I have downloaded a lot of info from here with regards this subject , however if you dont mind I would like to ask for some advice My...

Hi all, I've just completed fitting a set of aftermarket parking sensors to my 280SL so thought I would share. I've written up the full process on my blog together with many pictures. http://blogger.kritzinger.net/2011/12/mercedes-sl-fitting-parking-sensors.html The process was based on the...

Bought this kit off Ebay, and came sealed and complete with wiring for the sensors (common-rail sensors, quantity control valve, injectors, boost pressure and temperature) and the two boxes (control unit and injector module) + a 10 page fitting instructions. All in all a fairly...

I have a Brabus D6 (III) that i want to install on my E320 CDI V6. Removed from a friends car via a garage before sale, unfortunately i don't have the instructions to fit. Can anyone advise where the wires are meant to go or does someone have a copy of the installation manual i could borrow...

I'd like to have hard-wired power supplies for satnav (Garmin) and for a [forward looking] camera, as I hate wires running around the dashboard. I bought the actual sets, but am not quite sure if I should attempt to do it myself, and do not know anyone locally who I can trust to do it for me...

Hi I was going to install a Parrot CK 3000 Evo system in my wife's W169 with the standard head unit - I think Audio 5. Got all the kit, but I am quite confused about the primitive wiring given by parrot. I am lost where the telemute lead should go and if I could get ignition power from the...

Hi People I now have a Audio 20 with in built bluetooth & 6 CD charger and it has the fiber optics connection at the back, My car has the fiber optics for the old Audio 20 with pre phone wiring W203 06, I bought the harness to be used from command online Questions Would this Audio 20...

Hi People I need to connect the microphone extension from the audio system to the existing microphone situated in the Rear view mirror, I dont even know where to start from :wallbash::confused: and the easiest way to do it Please Help

Hi People Thanks for the advise, I have just recieved my CLC Audio 20 :bannana::bannana: To be in install in my w203 Sports edition 06 What other cables would i need or would it work with existing cable already fitted ? and if not can i have part numbers for the cables Thanks Guys Much...

I have a post facelift 2004 W203 which has the phone pre-wirig installed. My question is, will the crade shown below allow me to connect my Blackberry 8520 or do I need anything else. MERCEDES HFP BLUETOOTH PHONE CRADLE - Part No B67875877 Cheers Ian

MISTAKE IN THE TITLE: It's actually a Clifford alarm, sorry! I hired a guy to install the alarm on my W124, but after he finished it, the central locking wasn't working, if you used the remote control. It locks and unlocks fine using the original key on the door, but not with the remote. He...

Hi all - I have two Alpine amps to go into the car. Its a 1999 E55 AMG. The smaller amp is 2 channel, the larger is a V12 4-channel. They are both mounted on boards at the moment with the cables disappearing behind the boards so it's nice & neat. I'm wanting ideas from people who've...

:bannana: left the idea of replacing the deck speakers for something with a little more umff - fits in perfectly with a few minor ajustments :bannana:

I had some crappy JVC tape radio on my W124, which wasn't even working, so decided to remove that and put a nice Pionner CD receiver. The problem is that the JVC was connected by a completely different plug, and it's obvious that I need some kind of adapter, but don't know which one? :confused...

As previously posted, I have a 2005 ML 270 CDI (W163) with Audio 10 and 6-CD player, and option 386 listed on the door frame. I have looked through the excellent Mercupgrades site but can't match the phone console in the attached images to any they cover. There are two cabled boxes under the...

HI everybody, has anyone got a record of the part numbers for the fitting kit for a MC3110 CD changer unit? Its got to fit in the box behind the passengers seat. Any tips on fitting would also be gratefully received, before I start ripping it apart.

An interesting article Mercedes Installation Packages - MBenzNL - European Car Magazine

I was trying to fit my interface that ive finally managed to get a hold of for my kenwood head unit and whilst i was connecting one of the cables the blue full beam indicator bulb came on a few times then the roof light went out. They all went back on fine and the car starts etc but now i have...