nut

Guys just a quick one, would I be right in thinking I need 17" wheel nut covers for my car? Not 100% sure! Thanks

Hey guys, I need a little help. Does anyone now what size the rear hub nuts are on a C200??? I need to gain access to the caliper mounting holes to drill out a broken bolt, but the hub and parking brake assembly is in the way and its to tight from behind. help would b much appreciated...

Hi Chaps, I'm looking to add another set of locking wheel nuts to my car, anyone know of good ones i should look for ? I've had alloys stolen off my BMW in the past so i want the best security i can get really, hence having two sets on the car. Cheers

I seem to recall a thread (I think it was on this forum..) in which the OP had fitted some rather nice genuine MB nut covers to his door check strap bolts. I can't find the thread now, and I would like to get some of these covers but I need a part number..

I've misplaced my locking nut key. Cannot find it at all! I keep it in the boot in the little holder, definately not there, used it the day before yesterday! So I fear I've left it on the bolt and it's fell off when driving! Went to Mercedes Less than helpful £30 for a new key and they can't...

The sump nut on my C240 W202 is stuck! It looks like the last owner attempted to undo it and damaged the outside so now not even a spanner or socket will fit properly. Any ideas or suggestions? I want to do an oil change and I have a new sump nut to replace but removing the original is...

A few questions: My wheel nuts have been over torqued by the previous owner. I've already sheared off a socket adaptor, so now I think I need a quality breaker bar. There are lots of sale online, but can anyone recommend a high strength one that is man enough for the job? (I need 17mm)...

what not to do!! http://www.honda-tech.com/showthread.php?t=2684546 :eek:

duplicate

Hello I was just about to whip 3 wheels off merc and went to use the locking wheel nut and it just spins on the nuts, its fooked.... Now I'm stuck and I don't know how I'm going to get these off? any help would be great cheers,

c220 cdi, just noticed there is a wheel nut broken off on my front wheel is this dangerous and how can it be fixed ? any help much appreciated

I'm swapping the driver's and passenger leather seat covers on my W201, as the passenger seat is like new and the driver's seat has had a lot of use. The passenger seat has the armrest fitted. I don't have a socket big enough to fit the large nut that secures the armrest to the seat frame...

as this is post 202 will or should i stop as im a w202 nut how long before i can help myself and post again i must be bored to come up with this one :bannana:

How can I find out the size of my wheel nuts (19mm, 21mm etc.) without removing them and getting the ruler out?

Two of the bolts on my back wheel hub are not screwing in tightly, the thread seems knackered on the hub. Is it possible to get an insert put in these? A Helicoil or whatnot. Or if not, is it a big job to change the rear hub? I do have a spares car i can cannibalise if necessary at some...

There was a little play in both the front wheels of my W210 so I've taken up the slack in the nut literally with my fingers (I don't want to overload the bearing) and the wheels feel much better but still rotating freely and with no tight spots. What's the correct procedure for these...

The last time the wheels were off the car was 3 weeks ago for new discs and pads at the rear, fitted by my local MB dealer. They would obviously have needed to remove rear wheels. Washing the car today I notice a missing wheel nut on rear wheel. Curious. I have a spare and went to fit it, but...

So ive lost the key for the Mcgard locking wheel bolts on my SEC, its very annoying as i need to get rid of the wheels to put my new set on. I know a lot of tyre places have a tool which can remove them but the car is SORN'd and uninsured. So anyone in the Coventry area fancy making a couple of...

Got a secong hand Diff today, its leaking a bit at the Nuts at the front that hold the triangle that hold the prop. They untied it trying to take it out. Today I took it out to see if the seal was OK, no leak there. Can I just tied it up again ( the nut) and this would stop the leak as there is...

Hi All, This is a really silly one, but on my newly acquired 220 the wiper spindle securing nuts are inexplicably missing, giving me comically mobile (barely usable) wipers. My MB main dealer is having difficulty sourcing them, the part number is A0029902651 and can be seen as no. 92 on the...