spacers

Hi guys, Looking to purchase a pair soon so if anyone has any lying around give me a shout. Must be hubcentric Aluminium spacers, bolts aren't needed. 15mm per side. Cheers

Im quiet interested in the idea of widening my rear wheels so that they are flush/nearly flush with the arches. Ill be honest, I dont really understand anything to do with alloys etc. so need some help please :D I have AMG Style III 18" alloys. 1) Can I only fit spacers to the rear? 2)...

Had the alloys refurbished at Derby Alloys and fitted some 20mm hubcentric rear spacers made by Bimecc with longer bolts. Rears are now in line with the fronts and fill the arches properly. No wheel wobble or adverse effect felt so far...

OK I understand how wheel offsets work etc. so if I have a wheel with an offset of ET44 that goes on a car that needs an offset of 32 I need a 12mm spacer to get the ET44 wheel offset correctly. Now that all makes sense mathematically and I know I would need hubcentric spacers etc. but assuming...

As above, bought some AMG splits for my car, need a pair spacers to get them over my brakes. 15mm or 20mm should be fine. Cheap as possible :thumb::bannana: Thanks.

Hi guys, bought some AMG split style wheels for my car this week, gone to try them and they don't quite fit because of the AMG brakes, so i need some spacers. Been reading a few different things about what ones i need, do i need this style? with the extended spigot. MERCEDES CLK FRONT...

I bought these for my W164 ML and I've found out I need 15mm and not 20mm - An expensive mistake!! These are the high quality German made bolt to the hub design (with supplied bolts) then use your current wheel bolts to bolt the wheel to the spacer. The link below is the company i bought...

Hi guys. I need to order some front wing spacers for my 300ce. Does anyone have the correct part number? Scott

Pair of Hubcentric 20mm wheel spacers 5 stud 5x112PCD 66.6 centre bore, Mercedes etc. Brand new and unused, bought these for my Mercedes CLS when I bought 20 inch wheels for it, but never got round to putting them on then sold the car. So these have been sat in the garage since. £60 + P&P...

Just been to look at a set of Mercedes wheels and tyres, really liked them and the tyre fitter started to fit them in place of mine. He swapped my tyres onto the front as the wheels for sale had 245/45/17 tyres on all four. Having fitted the near side pair he then asked me to turn my car around...

For sale I have a pair of hub centric wheel spacers, spec is as follows; 5 x 112 66.6 25mm They are manufactured to a very high quality by TPR and were only fitted to the car (CLS 55) for 6 months so are still in very good condition. They extend the the position of the wheel by 25mm...

Can someone help me here, I want to widen the stance of the ML with top quality H&R spacers 20mm at the rear and 10mm at the front. I've read through many US posts on this and all seems ok for me to do this, however i have also got negative feedback that altering the track of the 4x4 system...

Hello I have just bought a new set of wheels for my W208 CLK. They are Front: 8.5x19 ET43 Rear: 9.5x19 ET45 Now I know the ideal offset for the CLK is around 32-35, but I really want to avoid using huge spacers, do you think I may just about get away with a 5mm spacer front and back...

Hey guys, Just something I wanted to share with you all.. Below, is a link to a thread on the GT-R forum about a guy whos car suffered a catastrophic failure of a wheel spacer he was using on his front hubs. :eek::doh: I'm sure we are all pretty well educated when it comes to wheel...

Evening all, Bought some 17 wheels that were originally from a SL500 R230 (2003) for my 2001 c270 as part of plan to have two sets of wheels, one for winter tyres, one for summer. The 17 inch wheels I have bought are 8" wide, with 35 offset. However, having been up to local garage...

Got a full set of four H&R Hubcentric 20mm Spacers. These are the safest option for spacers, these bolt to the hub first with bolts that are included. Then you bolt your wheel to the spacers. These are only about 15 months old and cost a lot more than this new. £110 posted for all four...

Well another box ticked on my to do list: Had my brother-in-law knock me up front and rear hub centric spacers today 20mm rear 15mm front. Here he is machining the billet alloy then drilling the holes: Spacers for W163 ML - YouTube Spacers for W163 ML - YouTube here's some before and...

Hi all As the title suggests really, looking at getting some 15mm spacers on the front, just wanted to know if the standard bolts are long enough or wether to get longer ones? The car is question is a 2004 S55 AMG. Thanks.

On the off chance if anyone has a cheap pair of hubcentric spacers please get in touch. Cheers

Help I need a set of hub centric spacers for the font on my 2004 C55 AMG. I have factory fitted AMG front discs. Can anybody please tell me what size center bore I need to fit on the fronts? Is it 66.6 ?