• The Forums are now open to new registrations, adverts are also being de-tuned.

210 exhaust,

welland99

Active Member
Joined
Feb 26, 2009
Messages
699
Location
Malvern
Car
W210 E280 estate 1999 facelift; 6th gen honda accord coupe 2000
Hello,
I have a problem with the exhaust on my 210 estate.


The hanging hook that is just rearwards of te CAT has come off the xhaust. Whilst this is OK for now, i feel that it must b causing adddional strain in the other hanger at the back of the car.

Does anybody know if it is possible to buy an exhaust hanger that clamps on to the exhaust, like an exhaust clamp (but with a long leg on one side)

Peter
 
You could easily fabricate one.
Use an exhaust clamp of the correct diameter.
Use a piece of suitable plate to make a hook with a hole drilled in one end.
Fasten the end with the hole onto one of the bolts of the clamp.
Shape the other end to support your exhaust.
 
Any exhaust outfit should be able to weld another bracket on for a nominal charge.
 
My local exhaust centre welded mine back on when it failed. Charged me a fiver!
 

Users who are viewing this thread

Back
Top Bottom