horsesuitedfool
Active Member
Anyone know where the EGR valve is on a C270 CDI 2005 model, i want to remove and clean it......Also is there any other pipes or anything that should be cleaned at same time??? Thanks for help.....
C270 CDI EGR Valve etc......
- Thread starter horsesuitedfool
- Start date
- Joined
- Feb 8, 2007
- Messages
- 20,604
- Location
- Portsmouth, Hampshire.
- Car
- E55K SL500 E250X2 Smart44 Brabus Track car E450Cabriolet X350 Pick up
Why do you want to clean it?
OP
OP
horsesuitedfool
Active Member
Because i get a small bit of smoke under acceleration and my car has done 110k miles so thought its probably never been cleaned and could benefit from being cleaned out properly...
- Joined
- Feb 8, 2007
- Messages
- 20,604
- Location
- Portsmouth, Hampshire.
- Car
- E55K SL500 E250X2 Smart44 Brabus Track car E450Cabriolet X350 Pick up
You are right. Get cleaning!
sspeed
MB Enthusiast
- Joined
- Apr 19, 2009
- Messages
- 1,018
- Car
- 2006 CLK320 CDi
Errr thats the most helpful hint I have ever read !!
alexander patie
Active Member
the valve is mounted to the rear of the engine at the n/s. it is bolted on to an aluminium casting with 2x male torx headed screws. if you do clean it, make sure to remove the plastic cover on the end and clean the parts in there - they tend to get more crud on than the actual valve.