C32 65mm pulley, sl55 intakes

[Neil Mackay]

I'll be selling on my C32 AMG soon and was wondering whether there is any interest out there in the 65mm pulley and SL55 full air intakes I've installed on the car as it will more than likely go back to standard when it goes. Retail for the 55 intakes are around £350 and the Y pipe I have is the right one for the '32 throttle body not the later SL55 Y which is 82mm! The 65mm EC pulley has probably done 15k miles and has been faultless, I even have a spare bearing anyway I'm sure if I let Jerry know my car is back to standard that the map will be transferable (although if have to check that first!!) last time I looked the map and pulley were £800 on ECUK's site so over a grands worth of mods! Let me know if anyone is interested, as the running cost of this car is now crippling me!!

I've also got a water pump (Merc genuine) which could be up for grabs if it doesn't go with the car for installation!

 

[dredd32]

A bargain mate.
I'm sure someone will benefit from them. Hope it returns the gains it gave on your 32

 

[astamir]

I'll be selling on my C32 AMG soon and was wondering whether there is any interest out there in the 65mm pulley and SL55 full air intakes I've installed on the car as it will more than likely go back to standard when it goes. Retail for the 55 intakes are around £350
Hi
Do you know if the Y pipe fit the w208 clk55 throttle body?
Thanks

 

[Neil Mackay]

To be honest I haven't a clue!! I think the SL Y is the same as the E55 Y albeit with a different part number!

 

[Terry_]

Was your car at Benz on the green?

 

[Neil Mackay]

Id take offers in the very close region of

£250 for the SL intake full system (don't really want to split it)

£550 for the pulley and map (after EC confirm its ok to transfer the map obviously)

Let's not also forget it would all fit that very rare beast the SLK32 AMG as well!!

Delivery by agreement at whatever it costs to send! Otherwise it will all go on eBay or with the car!

Pump cost a fair bit so would take £250 for that ('32 water pumps have an extra spigot that other M112 engines have a blank thus the huge price hike!!)

 

[Neil Mackay]

Update, Jerry has just advised EC no longer allow map transfers so the pulley will either go with the car or on its own without map for £300 including spare bearing!

 

[Neil Mackay]

Photos of intakes





Includes the y pipe, two air boxes and two front pipes! Filters were changed about 500 miles ago

 

[Neil Mackay]

Was your car at Benz on the green?

Yes it was at Benz on the Green, sorry didn't see your message!!

 

[Terry_]

It's looks a lovely motor

 

[Neil Mackay]

The car in now provisionally sold so the pulley and intakes are definitely now for sale:-

Full SL intakes, including all the jubilee clips needed and the passenger side air box trimmed to fit the C32 (due to the oil filler neck) - £250 plus delivery, or local pick up if your nearby

Eurocharged 65mm pulley plus spare bearing, you will need to have it mapped for the full benefit but a pulley change itself is fine for the car (circa 25hp increase without map, 50hp with) - £300.00 plus delivery, or local pickup if your nearby

Eurocharged cable plus usb stick with software - retails on Eurocharged website for £100 (mine didn't include the case when I got it so just the cable and usb) - £50 plus delivery, or local pickup if your nearby

Would consider throwing the cable in if the pulley and intakes were bought together!

Private message me if you are interested

 

[Neil Mackay]

Intakes now provisionally sold

 

[Neil Mackay]

Pulley, spare bearing and cable now sold