• The Forums are now open to new registrations, adverts are also being de-tuned.

Camber E53

Reading1801

New Member
Joined
Oct 20, 2020
Messages
9
Location
Lincoln
Car
E53
Anyone familiar with camber tolerances and Hunter. All Cambers seem negative, front right is a red which would mirror wear on last tyre. Car is less than 3 years old. Would you take it to MB or WIM to fix? Why would it be out so much? Thanks
20230119_133220.jpg
 
It could be out of alignment for a variety of reasons. Given the state of our roads, it's not beyond the realms of possibility that your car could be out by that much, even at 3 years old?
 
there isno camber adjustments that can be done on the w213 (im assuming that's what you have), earlier models had camber adjustment bolts from MB you could retrofit, but there is none for the w213.

im afraid there is no real resolution apart from aftermarket solutions which also aren't the best.

let us know how you get on
 
Its only a tiny bit out or the target range....0.06......not enough to worry about IMO. The other side is on the limit too.
 
I would definitely take it to WIM, and not MB, if it needs adjusting. On My W211 Tony who has passed away, did fit the bolts. On my W213 hasn’t been done, probably as Alps says because this can’t be done.

But WIM has always been my go to for my current and previous Merc.
 
Thanks all, yes it's a 213. I think as it's on the limit then live with it, especially as no easy solution. Cheers
 

Users who are viewing this thread

Back
Top Bottom