• The Forums are now open to new registrations, adverts are also being de-tuned.

Comand illumination

damnearperfect

New Member
Joined
Apr 22, 2006
Messages
1
Hi all
I've just had comand retro fitted and it works ok - but the buttons on the set don't light up at all nor does the map direction indicator screen show up in the centre of the speedo.
The car is an E270 W211
Any ideas

Thanks :confused:
 
Last edited:
damnearperfect said:
Hi all
I've just had comand retro fitted and it works ok - but the buttons on the set don't light up at all nor does the map direction indicator screen show up in the centre of the speedo.
The car is an E270 W211
Any ideas

Thanks :confused:

Sounds like the job isnt finished.
 
damnearperfect said:
Hi all
I've just had comand retro fitted and it works ok - but the buttons on the set don't light up at all nor does the map direction indicator screen show up in the centre of the speedo.
The car is an E270 W211
Any ideas

Thanks :confused:

sounds like it just needs coding to the cluster for satnav.

if its showing up "no navi" on the cluster then it means it isnt fitted properly (no canbus wires to comand from cluster), but if it doesnt show no-navi and no nav info is selectable from the cluster via the steering wheel buttons then it means its not coded by a MB dealer.

get yourself to a dealer and get them to switch on the command for the cluster.

do the lights on the command work if u manually set to "night mode"?
 

Users who are viewing this thread

Back
Top Bottom