cps sensor

[gravel]

anyone got any info on changing one?

 

[Rumble]

I'm guessing you mean the crankshaft position sensor, this may help

http://www.mbclub.co.uk/forums/showthread.php?t=41758

or this....

http://www.mbclub.co.uk/forums/showthread.php?t=38222

 

[television]

Before you change it you can measure it, they measure 1kΩ when good and infinity or 100kΩ when bad, so if the engine stopped you could measure it then.

Item 29 in the link shows where it is, right at the rear of the engine, only held in with one screw

http://www.detali.ru/cat/oem_mb2.as...GA=722.626&CT=M&cat=65C&SID=15&SGR=105&SGN=03

 

[gravel]

just got a price from merc 68 pounds plus vat, got a price from euro parts 37 plus vat, i asked him was it a bosch part he said it wasnt,003153288. i dont want to get the wrong part, as i believe they have different conections on some models,
my chasis ,WDC1631542A060213.
Do you think for wat its worth getting the right one from merc, or would it be the same part?
regards.

 

[television]

just got a price from merc 68 pounds plus vat, got a price from euro parts 37 plus vat, i asked him was it a bosch part he said it wasnt,003153288. i dont want to get the wrong part, as i believe they have different conections on some models,
my chasis ,WDC1631542A060213.
Do you think for wat its worth getting the right one from merc, or would it be the same part?
regards.

£48 from Bosch it is a Bosch part and has a Bosch part number on it

 

[gravel]

Do you have the address? and prt number?

 

[television]

Do you have the address? and prt number?

The CPS has the MB number one side and the Bosch on the other side

I only have a 003 153 75 28 and a 27 28 to look at.

 

[gravel]

Thats the part euro parts gave me a 003 153 75 28 The number ive got is 0261210141, but i dont no whether its the correct part. for the 1998 320 model.

 

[television]

Thats the part euro parts gave me a 003 153 75 28 The number ive got is 0261210141, but i dont no whether its the correct part. for the 1998 320 model.

It could be, as the are similar to the ones I have here. Any Bosch service center has a book listing the correct one

 

[gravel]

do you have a link.
thanks for the help.

 

[television]

do you have a link.
thanks for the help.

Almost every large town has a Bosch service center in it, look in your Yellow pages

 

[television]

http://www.boschcarservice.co.uk/

 

[BonzoDog]

Fascinating or, as Stanley Unwin would have said, it's a matter of connecting a wiggle with the undularrowated flange gobbler, especially if your £13/6/7 UK31 hot contaminpolluter is measured in 90's and not imperial whetstones. Or was I looking at this upside down?
No I haven't been drinking but I think I will indulge in a little alcoholic stimulation right now.

 

[television]

Fascinating or, as Stanley Unwin would have said, it's a matter of connecting a wiggle with the undularrowated flange gobbler, especially if your £13/6/7 UK31 hot contaminpolluter is measured in 90's and not imperial whetstones. Or was I looking at this upside down?
No I haven't been drinking but I think I will indulge in a little alcoholic stimulation right now.

You cant do that on post 1995 cars, it does not work, I have tried

 

[BonzoDog]

You cant do that on post 1995 cars, it does not work, I have tried

My comments of course were referring to the Crown Prosecution Service and John Reid's famous comments when he tried changing it. It was, if I am not mistaken, a post '95 but pre 2007 bootleg, vinyl recording in Committee by the jovial House DJ at that time, Claire Short who can be heard yodelling the mantra 'Mix 'em up baby' in the background. Available on YouTube soon.
No, it was only one glass of a 2004 Medoc (should be left to 2010 I'm told) last night. Must remind Mrs Bonzo to stop serving wine in pint glasses.