• The Forums are now open to new registrations, adverts are also being de-tuned.

Digital dash nav display fault

MeQ

Active Member
Joined
Nov 29, 2023
Messages
449
Location
UK
Car
EQE 300 Premium
Only happens when nav is selected in the centre and the main screen display is fine.

Is there a reset or workaround for this?

IMG_6826.jpeg
 
As far as I am aware, you're our first member to have an EQE (or EQS). Not sure we can help....
 
Last edited:
  • Like
Reactions: MeQ
....my own experience was gained in the seventies, the only advice I can offer is to bang on the side of the dash a few times, if that doesn't work than ask the missus to sit in the car and look at the screen while you climb on the roof and move the antenna........ :D
 
As far as I am aware, you're out first member to have an EQE (or EQS). Not sure we can help....

Had my fingers crossed the digi dash issue may have cropped up on other models and easily resolved 🤞🏼
 
Last edited:
Quite probably a firmware issue, or the cabling between COMAND and the instrument cluster control unit - so a dealer job as it's under warranty.
Are you enjoying the EQE ?
R
 
  • Like
Reactions: MeQ
Quite probably a firmware issue, or the cabling between COMAND and the instrument cluster control unit - so a dealer job as it's under warranty.
Are you enjoying the EQE ?
R

I’m very happy with it so far, even more so now he nav screen has sorted itself 😆
 

Users who are viewing this thread

Back
Top Bottom