G Wagon Comand in a C 203

[mapleleaf]

Originally posted by connectcctv
The Can Bus is connected as all the controls work except the telephone. I connect the speed pulse to Con A pin 1and C2 pin 6.I got the pulse from plug 24, pin 3. his can be found under the bonnet on the under side of the fuse box near the A pillar. All work just fine with that connected

A friend of mine is trying to fit a G wagon Comand to his 2003 C203 (to which the above quote refers) but when we looked at pin 3 on plug 24, to tap into the speed pulse signal, all the pins were empty ie no wires coming in to any of the 3 pins on plug 24 (actually a socket)

Are we missing something here? Is there somewhere else we can find a speed pulse?

Any help much appreciated.

Cheers

 

[hash]

hi steve have a chat with kevin, he has some instructions on how to get it to work

cheers

kenny

 

[MBenzNL]

There is no connector at socket 24...a simple wire from pos 3 out of socket 24 to C2 pos 6 does the trick...

greetingz,

 

[mapleleaf]

Originally posted by MBenzNL
There is no connector at socket 24...a simple wire from pos 3 out of socket 24 to C2 pos 6 does the trick...

greetingz,

Thanks, but there doesnt seem to be any wires attached to the socket 24. there are just three pins with nothing behind them ?

Do we not also need to connect a speed pulse to ISO plug A pin1 as well as C2 pin 6 ?

Kenny - I think Kevin is on holiday

 

[MBenzNL]

There is no wire at socket 24...you need to connect one to pin3 in socket 24...did that as well in LA when some one asked me to install a 463 comand in a 203...

No speed needed or available in connector A pin 1...you only need speed at C2 pin 6.

greetingz,

 

[mapleleaf]

Ok Steve .

Thanks for the help