• The Forums are now open to new registrations, adverts are also being de-tuned.

inner wings w210

tld

New Member
Joined
Sep 17, 2014
Messages
1
Car
e280 w210
I have a 98 w210 280 which I have owned since 2000, done 300,000 miles (Total is 325) in her and am loath to consign to the scrapper. Still hits 130+, never failed an mot on emissions, everything works

problem is rust

I need new inner wings

where can I get them?
 
Anywhere where these are available for a 124? ( O/S ) as the welding required on my inner wing is substantial ( got to make a multi contoured curved repair patch )
 
Anywhere where these are available for a 124? ( O/S ) as the welding required on my inner wing is substantial ( got to make a multi contoured curved repair patch )

i did mine earlier this year. I welded 3 repair patches from sheet steel in after cutting out the rot. ended up from just behind the light, all the way up to just past the relays.
 
Anywhere where these are available for a 124? ( O/S ) as the welding required on my inner wing is substantial ( got to make a multi contoured curved repair patch )

I made a patch like that for my 210.

I made a template from cardboard and so knew the patch would fit when bent. I than cut this out of metal. Tack welded one edge to the inner wing and then bent the patch in situ using a hammer...it worked better than I expected.
 
I made a patch like that for my 210.

I made a template from cardboard and so knew the patch would fit when bent. I than cut this out of metal. Tack welded one edge to the inner wing and then bent the patch in situ using a hammer...it worked better than I expected.

yeah thats sort of how i approached it but my hole after i cut the rot out required a few bits of steel... unless concours its a waste of time and effort working with a repair panel on the inner wings i reckon
 

Users who are viewing this thread

Back
Top Bottom