nadeem
Active Member
- Joined
- Jul 22, 2007
- Messages
- 170
- Car
- E320 CDI Avantgarde 02
Hi,
This is on my E430 1998,
I opened my control units box only to find a purple wire cut from one of the connectors that plug into the ME control unit.
Picture attached,
No errors in the ME ECU i know the connector is related to the accelerator, because a fault is detected when i disconnect the connector via carsoft.
Top of my head error was on the lines of "Accelerator signel error check cable voltage".
I've fixed the cable but any ideas why someone would wanna snip this wire?
This is on my E430 1998,
I opened my control units box only to find a purple wire cut from one of the connectors that plug into the ME control unit.
Picture attached,
No errors in the ME ECU i know the connector is related to the accelerator, because a fault is detected when i disconnect the connector via carsoft.
Top of my head error was on the lines of "Accelerator signel error check cable voltage".
I've fixed the cable but any ideas why someone would wanna snip this wire?
