Suleimanelsamra
New Member
Hi i was wondering if any one kan help me in the lvds connector i really need one or guide me how to make it
Ntg 4.0 to Ntg 4.7 or 4.5
- Thread starter Suleimanelsamra
- Start date
Jigglyjohnson
Active Member
What are you trying to do
- Joined
- Jun 24, 2008
- Messages
- 49,752
- Location
- London
- Car
- 2022 Hyundai IONIQ 5 RWD / 2016 Suzuki Vitara AWD
Presumably fit COMAND Online NTG4.5/4.7 in a pre-facelift W204, replacing the original COMAND NTG4.
Jigglyjohnson
Active Member
If that's the case cant you get a lead from a dealer
- Joined
- Jun 24, 2008
- Messages
- 49,752
- Location
- London
- Car
- 2022 Hyundai IONIQ 5 RWD / 2016 Suzuki Vitara AWD
It's not an official MB retrofit, so the dealers will probably not have a loom for connecting post-facelift COMAND to a pre-facelift car.
www.comandonline.co.uk have been known to make custom wiring looms, but whether they can or want to make one for this particular retrofit, I don't know - Suleimanelsamra can phone them up and see if they're willing to quote him for this.
Suleimanelsamra
New Member
yeah im trying to retrofit the ntg 4.5/4.7 which has online usb and bluetooth on the w204 prefaclift model but it needs a specific connector since the displays differ between both
- Joined
- Jun 24, 2008
- Messages
- 49,752
- Location
- London
- Car
- 2022 Hyundai IONIQ 5 RWD / 2016 Suzuki Vitara AWD
I don't think you can use the display from NTG4 with NTG4.5. The other chap who did this retrofit also changed the entire dashboard and instrument cluster and fitted the NTG4.5 display. If not changing the dashboard, you may need to find a way to butcher the motorised pop-up unit and somehow stick a display from NTG4.5 into it.
Suleimanelsamra
New Member
Well i saw some old thread by somone here is the link you can check and see how but no details on the connector:
Ntg4.7 retrofit into Pre-facelift W204: Completed | Electronics and Audio
I have just finished my retrofit of a Ntg4.7 into my W204. To do this was a lot of work, I obtained the correct display adapter to keep the original flip screen and modified faceplate to allow the comand to fit the dash. Quite a bit of rewiring was also required for the CAN connection...
forums.mbclub.co.uk
