Removing inlet flaps on a v6

[Zu11y]

Hi all ive got a clk320 cdi, i had an issue with the shut off motor due to oil ingress, rather than replacing it i decided to remove the entire system.

I followed a thread by Alex crow, however the flaps on the v6 are different, they are not held in with a torx screw. They appear to be riveted in place.

Anyone removed them off a v6 .

Thanks guys

 

[Zu11y]

Got the flaps out anyone have any idea how to plug the holes as they were riveted in place there is no thread to simply screw in, any alternatives

 

[panason1c]

You have to tap the threads yourself and then use suitable bolts to seal the holes.

 

[Zu11y]

Hi thanks for that, found a local aluminum welder who did both manifolds (all 6 holes) for £40. time to put it all back together