Sat Nav Version

[johncook109]

Hi There, could somebody please tell me how I find out what sat nav version I am running to see if I need to up date. S320 tdi 2007
Thanks

 

[whitenemesis]

Eject the disc and have a look?

 

[johncook109]

Hi there. I have the DVD unit and thought it has a hard drive, so where`s the disc because its not in there.
Thanks form a complete novice

 

[whitenemesis]

IIRC you will find the disc in the Nav unit housed in the boot, probably in the near-side well.

 

[npuk]

Not on a 2007 S Class as it doesnt have one. It is harddisk based. You will probably have to look in the engineering menu to check.

 

[whitenemesis]

My apologies to johncook109

I was going on this statement from Richard's website

"NTG1 was fitted up until Model Year 2009 in the W220 S, W215 CL, R230 SL, W211 E, W219 CLS, R171 SLK vehicles.

 

[npuk]

I thought NTG3 was from 2007 same as NTG4 but it seems not then my mistake.

 

[johncook109]

Thanks to all. So I have NTG3 and will have to look where? for the version. I am a bit slow so a little clearer guide is need. Thank you

 

[whitenemesis]

There is a slight confusion as to the system you have. Would it be possible for you to check the boot to see if it has a nav unit? It would be behind the trim with an access flap.

 

[johncook109]

OK, behind a pull down panel which covers all the back seats in one reveals two big batteries to the right and above them a box with some big heavy cables attached but no sat nav box.

 

[npuk]

Just look at the link in post #6 to identify your system. They are completely different and there is a picture of both so it is easy to identify. It is either NTG1 or NTG3.

 

[johncook109]

Hi, I have done that and its NTG3 but the question is still what year version as the previous owner may have spent money allready and had the up date.

 

[npuk]

If it doesnt let you check map version via the navigation menu then you will need to check via engineering menu but I dont know the code to enter it on the NTG3 try a google search. Or get the map version read by STAR.

 

[johncook109]

If it doesnt let you check map version via the navigation menu then you will need to check via engineering menu but I dont know the code to enter it on the NTG3 try a google search. Or get the map version read by STAR.

Its a NTG3 Version 4 so new version on ordered so lets hope it loads as they say through the DVD without hassle.

 

[johncook109]

OK, DVD arrived and when loading it informed me version 4 update to version 11 and 40 mins later with ignition in position 1 all done. So Sorted