Vito (2011) front passenger bench seat

[Talie83]

Hi All,

I have just purchased a 2011 2.1 113cdi Vito dualiner and I need to replace the single front passenger seat to a double/bench seat. I would be very grateful it anyone can advise if I will also need a new base and if there is anything else I need to know before sourcing the bench seat (I assume I cannot use the rear bench seat I already have so if anyone has a front bench seat they'd like to swap for a vgc single front seat with armrests please do message me) much appreciated. T x

 

[BIG UN]

The bench double in the front normally would sit on a metal crossmember that bolts to both B Pillars, the single seat base is a different part number to the double but you may be able to use the single base.. the set up should look like this pic below when done..

 

[Talie83]

Thank you @BIG UN I am just thinking through options. I really do like the current 1+1 driver and passenger seats -they are really comfortable but I do need an extra seat while my kids still like to travel with me. I currently have a 2+1 (row 1) rear set up which I had planned to remove to make space for the camper conversion but thinking another option may be to use the single rear seat and just remove it when using as a camper. Do you know if the single rear seat can be used without the bench seat next to it? I will check out all the fixings tomorrow! Thanks again for your help!

 

[BIG UN]

No the single part of a 2+1 won't work on its own but if you have the 4 seat mounts as per Dualiner, you should be able to fit a single Viano rear seat into your mounts.

 

[m80]

Vito single seat coversion. | Interior

Hi. Hopefully a quick one. I fancy getting rid of my double front seat to replace with a single (w639). Wanting to take the easy option and leave the double base in and make some sort of cubby/drink holder out of it. I read somewhere there are seats with the same bolt pattern? As I would like...

forums.mbclub.co.uk

Time for a chat perhaps.

 

[celicanige]

Hi All,

I have just purchased a 2011 2.1 113cdi Vito dualiner and I need to replace the single front passenger seat to a double/bench seat. I would be very grateful it anyone can advise if I will also need a new base and if there is anything else I need to know before sourcing the bench seat (I assume I cannot use the rear bench seat I already have so if anyone has a front bench seat they'd like to swap for a vgc single front seat with armrests please do message me) much appreciated. T x

Hi. Im new so can't message you. Did you manage to sort this.. im needing to do this . Thanks