Vito MK1 Rear Seats

[NautiBuoy]

Hi, I have just bought a Vito Mk1 Van Swb. It has the factory floor in the back. I want to fit a row of 3 seats (out of another Vito. Does anyone know if there will be an existing bolt pattern below or will I have to drill new holes to bolt the seats in? If so will I have to drop the fuel tank to do so? Any advive greatly appreciated. Thank You

 

[Marku]

Quite a few posts on the forum on doing this - do a search. It is very unlikely that there are any fittings for the seats or anything else that has not been factory fitted. As has been said before MB do not include anything that has not been ordered.

 

[Gillsfan]

Hi did you get anywhere with you question? I need to mount a rock and roll bed in my Vito and excising holes would be useful.

 

[BIG UN]

Try searching for myself or Zenman as we have posted regarding fitting seats in the rear of your van but that was in a 639!! Hope that helps??

 

[NautiBuoy]

I have just fitted a rock'n'roll seat in and ws easy. The bolts fit in between wheel arch and don't come anywhere near the fuel tank. Just had to drop spare wheel to allows access. All in and done.