Vito W639 Fuse allocation

[Trucknightmares]

Want to run a piggyback circuit from the reverse light fuse to my camera receiver, but can't find which fuse is allocated to the reverse light system.

Have looked in the manual and on manualslib.com but neither appear to show which fuse is allocated to the rear lights.

Of course I could just be blind...

Sent from my SM-T550 using Tapatalk

 

[sparkydude]

Are you just looking for the reverse light signal in the front of the van ?

 

[Trucknightmares]

Basically I've installed a reversing camera with a wireless link.

At the moment I'm using power from the interior light (above the rear view mirror) for my power source but this is giving permanent power to the receiver and causing the screen to flicker which is distracting.

What id like to do is piggy back off the reverse light circuit so there's only power when reverse is engaged.



Sent from my SM-G920F using Tapatalk

 

[Trucknightmares]

Forgot to mention the transmitter and camera is powered from the reverse light itself.

Sent from my SM-G920F using Tapatalk

 

[peearn]

[FONT=&quot]Reversing signal right side behind tunnel cover white-blue wire in cable tree[/FONT][FONT=&quot][/FONT]

 

[sparkydude]

As above its a white with blue striped wire in a yellow plug in distribution box. It is in a black plastic bag behind the passengers side dash end plate

Nick

 

[Trucknightmares]

Thanks guys. Will have a look sometime this week.

Sent from my SM-G920F using Tapatalk

 

[Trucknightmares]

Solved the issue. Bought an xtrons head unit which utilised the canbus to switch to reverse view.
Awesome bit of kit.

Will post some photos in a bit.

Sent from my SM-G920F using Tapatalk