• The Forums are now open to new registrations, adverts are also being de-tuned.

W124 AMG alloy wheels

I saw these myself they would look nice on a black W124
 
Hmm, they will extend out by 3.2cm compared to standard, will need to be careful with tyre selection unless you roll the arches!:rolleyes:
 
Jay, as I understand it....wheels from W126's and SL's will compliment each other, however, wheels from W124, W202, W201 and W210's will compliment one another, but will not fit W126's and SL's....well thats what I've always gone on and I've never come unstuck.
 
Jay, as I understand it....wheels from W126's and SL's will compliment each other, however, wheels from W124, W202, W201 and W210's will compliment one another, but will not fit W126's and SL's....well thats what I've always gone on and I've never come unstuck.

I think you're right. If nothing else the bolt seats are different.
 
Only with 15mm spacers and longer bolts.
 
ok im keeping an eye on them, i see the hubcentric spacers tend to come in only 12 and 16mm..so i assume 16 would be best?
 
Have you seen the other set of Mexican Hats (5) he's selling aswell? With tyres, 3 hours to go and up to £15.00 Alright for a 123/126/116 and similar vintage.

Ciao.
 
Have you seen the other set of Mexican Hats (5) he's selling aswell? With tyres, 3 hours to go and up to £15.00 Alright for a 123/126/116 and similar vintage.

Ciao.

Thats a very good way to put them they really do look like mexican hats:p
 
well i was beat by a tenner...

my heart is set on three piece hence i held back at the last minute...

hopefully KLP will be supplying me a nice set....
 
Aren't they meant to be prone to cracking (around the bolt holes)?

Yes, usually due to being over tightened. IMO they are the best set of wheels for any mercedes of that era!
 
Aren't they meant to be prone to cracking (around the bolt holes)?

Caused by over torquing the wheel bolts with the use of impact guns.

I hand tighten all my wheels and use a torque wrench. I take the wheels off the car myself and put them back on myself to prevent any damage.
 
I will be doing the same!!!
 

Users who are viewing this thread

Back
Top Bottom