Jul 14, 2009 #1 pills12 New Member Joined Feb 11, 2009 Messages 27 Location kettering Car clk 230 w208 can anyone tell me how to remove the washer jets from my w208 need to clean as blocked and needle wont clear problem
can anyone tell me how to remove the washer jets from my w208 need to clean as blocked and needle wont clear problem
Jul 15, 2009 #2 SilverSaloon MB Enthusiast Joined Mar 16, 2004 Messages 7,758 Car 1994 W124 E300D Estate, 1985 R107 280SL pills12 said: can anyone tell me how to remove the washer jets from my w208 need to clean as blocked and needle wont clear problem Click to expand... you need to push them out from underneath. its a sort of clip. once you remove the wahser pipe and look up with a torch all should become clear.
pills12 said: can anyone tell me how to remove the washer jets from my w208 need to clean as blocked and needle wont clear problem Click to expand... you need to push them out from underneath. its a sort of clip. once you remove the wahser pipe and look up with a torch all should become clear.
Jul 15, 2009 #3 M MBK Active Member Joined Aug 20, 2008 Messages 755 there may be a plastic cover stopping you from seeing the jets you may have to remove this first, but otherwise do as SilverSaloon says. K
there may be a plastic cover stopping you from seeing the jets you may have to remove this first, but otherwise do as SilverSaloon says. K
Jul 15, 2009 #4 OP OP pills12 New Member Joined Feb 11, 2009 Messages 27 Location kettering Car clk 230 w208 any idea how to get pipe and electrics off before pushing out
Jul 15, 2009 #5 M MBK Active Member Joined Aug 20, 2008 Messages 755 pipes jus pull off, and electrics are conected using connectors jus push the clips in and pull off K
Jul 15, 2009 #6 Barbanasos Active Member Joined Mar 8, 2007 Messages 470 Location Manchester Car Mercedes E200 w124 and 2000 E55 AMG When you push the square plastic to release the whole cover & jet be careful not to lose a small plastic wedge that goes into one of the plastic clips to keep it extended and in tight in place when in the bonnet. Nearly lost mine.
When you push the square plastic to release the whole cover & jet be careful not to lose a small plastic wedge that goes into one of the plastic clips to keep it extended and in tight in place when in the bonnet. Nearly lost mine.