• The Forums are now open to new registrations, adverts are also being de-tuned.

arms

  1. h17n dj

    W126 Headlamp Wiper Arms

    Afternoon all, upon removing the headlamp wiper arms on my 500SEL, I tried to remove the washer jets that are built in (??) to the wiper arm and some of it kind of snapped.... could anybody please confirm that this part can just be swapped out, or do I have to purchase a whole new (expensive)...
  2. Celicasaur

    w124 cabrio rear arms replaced

    So earlier in the week I replaced my rear shocks for Bilstein B8's, as per a recommendation from some nice chaps on this forum (my car rode like Satan - maxing out on the suspension travel, etc). It made a nice difference, but still didn't rock my world. However, knowing that I was doing the...
  3. C

    E320 w211 front suspension arms

    I have a pair of front suspension arms for a w211 e320 cdi. Brand new still in wrapper. Selling as sold car. £50 for the pair.
  4. Stephen simpson

    E55 w211. Suspension arms bush replacement

    Hello all. I have recently had both rear lower arms changed mb parts at a cost of 450 for the arms. Had two front arms done a few weeks later parts by lemforder that were almost half price. Couldn't tell the difference as the garage ordered mb parts also. I gave lemforder a whirl??????? as i...
  5. C

    GL500 X164 Control Arms - Where From?

    Hi all Im new to this forum but a member of 6speed, benzworld, MBworld etc. Im hoping for some advice local to the UK for my 2011 GL500 because the front suspension knocks over potholes, speed bumps etc. and it also groans like an old wooden sideboard when Im on the brakes slowing to a stop...
  6. BIG_G_1979

    W211 top Suspension Arms

    Hi guys selling 2 top Suspension Arms For W211 these are brand new merc parts looking 200 for the pair http://i1074.photobucket.com/albums/w407/garethbevan59/Mobile%20Uploads/DSC_0608_zpsbuqangd4.jpg http://i1074.photobucket.com/albums/w407/garethbevan59/Mobile%20Uploads/DSC_0609_zpsyklf8v9l.jpg
  7. X

    Rear multi-link arms

    I'm currently looking to replace the rear multi-link arms on my w209 CLK55. I've had a look on EuroCarParts etc. and was wondering if I could get some advice on which ones to go for. My understanding is they're shared between different models/chassis? Could anyone recommend a manufacturer to...
  8. anfieldassasin

    230ce vs 300ce control arms

    Hi guys does anyone know if the lower control arms on 1990 230ce are interchangeable with a 1988 300ce? I have the old original arms from 230ce stripped and ready for a repaint before I put new bushes and ball joint in. I want to fit them to my 300ce, they look identical but thought I...
  9. S

    Cost of replacing front castor arms

    2008 W221 - may have to replace both front castor arms - any idea of the approx parts and labour costs I should expect to pay? thanks
  10. P

    W124 Headlight wipers arms.

    I know that this thread has been used before, there was a posting about a year ago, but I need the items so I am starting a new one. I need left and right headlight wiper arms, and wiper blades with them if available, for a 1991, W124, 260E. I don't know whether they are model specific with...
  11. chilsta

    New Febi 124 Wishbones- bush check please

    Hello I've just picked up a pair of Febi wishbones for my S124. Had a good read through a few posts here about these and decided that I'd replace them at 130k miles as a precautionary measure. Don't like the idea of an adrift front wheel! This post from WDB124066...
  12. BIG_G_1979

    need advice on fitting top arms on w211

    Hi guys need advice on fitting top arms on my W211 I've never done this before and would like to know if shock etc needs to come out and please advise of any pitfalls to the job in hand many thanks
  13. W

    Rocker arms for m271 engine

    Hi guys,Paul here. Can anyone help me please iv had the usual m271 chain stretched problem and am doing the job myself but im on the look out for 3 rocker arms for the car.also im looking for torque settings for the camshaft cradle. Many thanks Paul
  14. astamir

    Adjustable rear Camber arms for w208

    Hi guys! After lowering my car the rear and the front are out of alignment. Today at wheels in motion been told that we can sort out the front with adjuster bolts from dealer, but to sort the rear I would need the adjustable camber rear arms for clk55 w208. So I'm after the adjustable rear...
  15. M

    190e rear bottom arms

    As title can some one please assist me in finding two rear bottom swing arms the ones that the springs sit in for a 1992 190e Thanks mark
  16. legonutter

    Front lower control arms w203

    Hi I have a w203 2001 C270 cdi It's just failed it's mot and needs all the lower front control arms Where can I find these
  17. C

    C180 W203 front Arms

    It seems the front suspension bush has gone on my C180 its covered in oil and vibration over bumps. Also the other side has been squeeking for about 12months think its the ball joint on arm, not the anti roll bar checked those bushes. Had a look at the Lemforder are these still best, also...
  18. tcb180

    W203 Rear Suspension Arms

    I have more or less a full set of rear suspension arms for a W203. Superior Meyle German Quality all brand new and boxed. Part numbers 210 350 33 06 210 350 34 06 203 350 07 53 Plus a Febi wishbone bush part number 01303 Willing to split. Can also post. Offers considered.
  19. S

    C63 AMG Torque Arms & Camshafts

    Whilst i was driving in Italy my car starting making this funny clicking noise whilst i was coasting at speeds around 20mph. Took it to an Italian MB and they told me it was the control arm and it was safe to drive back to England. Anyway i did, got the car into a Mercedes near a certain...
  20. B

    w203 rear suspension arms

    has anybody ever replaced all 4 of the rear suspension arms on the w203 as im going to be doing this tomorrow ive had a look but i cant see how the front top one will come off (as the bolt must have been fitted before the subframe was bolted in place ) their isnt enough room for the bolt to come...
Back
Top Bottom