cap

When I started driving I noticed that every 10 seconds the car was making a noise similar to the noise of not released handbrake and at that point I felt that the car was shaking slightly. So after about 500 meters I stopped and checked the car and noticed that it the front driver's side is...

Hi, my W210 E320 CDi has this leak from the fuel filler cap area which I've read about and it seems the filler cap is the issue (it has a cheap after market one at the moment). I am going to source a dealer with this in stock and get one first thing in the morning and see if this solves the leak...

Following on from this thread... http://www.mbclub.co.uk/forums/general-discussion/143641-whats-wrong-my-r107sl.html the problem actually went away over the warmer months so i didnt do anything about it. However, it is back with a vengance! Can has been parked for long periods in the...

Hi guys, I need 1 Centre cap for an early 3 piece amg oz split rim. Am I right in believing the earlier style had Centre caps with a smaller diameter than the later produced rims? Thanks

For quite a while now, i've had intermittent difficulty removing the fuel filer cap on my 210. I can always do it in the end but SWMBO sometimes has to go and find a strong man to help. The cap is basically very difficult to turn. Does anybody else experience this. Why does it happen?

G'day guys, newbie posting here. I have a Benz W124 E220 2.2L 4 CYL Saloon it's 1994, I'm getting into horse riding but I don't want to give up my E class for a 4X4 because I love my Benz. I need to be able to tow a float that would weigh around 800kgs and a horse about 500kgs probs a bit...

Hi, I have an 80's set of Remotec wheels for my SEC, they are the spoked effect type. The large centre cap covers the centre of the wheel and the bolt area, and its meant to have a rubber ring around the edge so it seats against the wheel nicely. The problem is that mine are perished and I...

about to have the wheels refurbished so want new centre caps. I want genuine items. Whats the correct size I should be looking for? Scott

Hi All, I have a W246 which has an intermittent issue with the fuel filler cap popping open sometimes leaving it flapping around. At first I thought someone had bumped it in car park but this weekend a couple of times its sprung open when car was unlocked, anyone seen this before ? It seems...

I recently filled my engine with oil on my W123 200e and forgot to put the cap back on (idiot) needless to say the oil spread everywhere, can I jet wash the bay to remove the mess? Thanks

I have lost one of the centre caps from my Ronal Carlsson wheels and have scoured the net but have found nothing. It is plastic and 150 mm in diameter. Anyone got any ideas ?

hi, i looking for MB A210 evo rear bumper towing eye cover (silver) thanks Sent from my iPhone using MBClub UK

02 plate, CLK 230 drivers side. See picture for detail: http://sh.digitalvault.bt.com/invite/login?c=736a773735406274696e7465726e65742e636f6d&i=3e8df-136bbb0697a-gemini01&t=5ade80c2ae3a3941&r=mg&lang=en Please contact me if you have one or know where I can buy one. Many Thanks Si.

A very minor problem, but if not too difficult I would like to fix it. The pin that locks the filler cap cover is being energised, but does not come out far enough to be effective. Is it a big job to remove the boot trims to get at the problem solenoid? Or any other ideas? Thanks

Hi - I have had my aerial cap nicked off my SL55 R230 :wallbash:. Does anyone know if I have to buy straight from MB or can I source elsewhere??

I need to replace these components. Is Beru OEM MB stuff & the equivalent of Bosch for quality, durability, reliability etc? TIA

I feel a complete donkey for asking this question BUT needs must. I am attempting to remove the oil filler cap. Having located such item I notice it has a screw head in the middle of the cap. Is this just for effect or do I need a spanner to remove ? Seems bizarre just to remove filler cap...

My friend has a 1984 123 series 230 E petrol. He would like to know how to get the Power Steering Resevoir Cap off. Might sound a bit daft, but he's not sure wether you twist, pull or yank. I think its rubber. He dosent want to damage it i presume. Many thanks for your time.

My friend has a 1984 123 series 230 E petrol. He would like to know how to get the Powere= Steering Resevoir Cap off. Might sound a bit daft, but he's not sure wether you twist, pull or yank. I think its rubber. He dosent want to damage it i presume. Many thanks for your time.

Good day, I'm looking for few sets of Crankshaft Main Bearing Cap for MB W211, E220 Euro4 06 model. Pls help! Attached are the part's pic