Hello all
My car has a four pin pressure switch while the dealer tells me that based on my VIN I need a three pin one. Has anyone run into this problem before?
If yes, would you mind sharing the part number. I'm fairly certain I need a new pressure switch.
Thanks!
Hi
Does anyone know the MB part numbers for:
- W124 lower balljoint
- nut that goes on the balljoint (unless its included?)
- nut and bolt that secures the balljoint by passing through the notch in it
Thanks in advance!!
Derek
p.s. guess what gawd awful job i have planned for...
hi
recently (last few weeks) occasionally the car is making a louder noise from the engine when accelerating. its random though sometimes it goes back to normal, which makes the fault more noticable.
any ideas what this could be? Injectors?
thanks
derek
Hello all,
First off, this is my first post in this forum. I'm very excited to be here!
My 1998 E300D needs new front shocks. I am having a hard time finding the correct part number though; all shocks I found from aftermarket manufacturers don't seem to fit cars with electronic stability...
I am looking for a pair of front wings that I can bolt on to my car to keep it on the road whilst I have the originals repaired. Condition and colour not too important but o/s one must have air intake slats of course. Alternatively a couple (or one esp o/s) of good original MB wings would be of...
Just happened to notice this, maybe of interest to somebody.
http://www.ebay.co.uk/itm/MERCEDES-E300-D-AUTO-/300963587211?pt=Automobiles_UK&hash=item4612d3e48b
Picked up the car today (a 95 E300d multivalve) really pleased with it on the way home, but a few hours later and I've been greeted with a handful of little old used car gremlins I think....
Inside the car (atop the dash speaker covers) are 2 alarm sensors. they are very period looking and...
Hi,
New to the world of MB ownership, recently gained a 1988 W124 E300D onto the fleet - and to be honest it's a complete wreck but I love a lost cause(plus I swapped it for an equally shed like toyota celica so nothing lost really). The but however, is a biggie - the plumbing has been...
I have spent the afternoon reading reams of posts on this subject and I am no clearer on the subject.
I want to drop my 95 300d bought last week by 30/40mm then put a set of 17s on.
Is there any one out there who have done this model and can provide a list of stuff I need to buy?
Also a rim...
The love affair had to come to an end. The kids are all grown up, no more trips up and down the motorway dropping off and collecting them. Finally found a job locally so no more weekly trips down to London. I have been driving W124’s for the last 10 years. I will now be on the lookout for a...
can anyone help
this 1998 e300d has a mercedes aftermarket fitted alarm and it willl not live up terminal 15 it puts the srs light on the dash but that is it, i have removed the alarm but the fault is still present i can not run a diagnostics on the car as there is no ignition live, the...
I had an intermittent problem with my indicator, now it doesn't work at all?? ive replaced the whole stalk but still doesn't work?? ive looked all over and cant find what mite control it?? found a relay module in the ecu box does this control it?? no fuses blown etc etc
I had an intermittent problem with my indicator, now it doesn't work at all?? ive replaced the whole stalk but still doesn't work?? ive looked all over and cant find what mite control it?? found a relay module in the ecu box does this control it?? no fuses blown etc etc
e300d w124 filter/service kit for sale. Bought new from Eurocarparts but changed car, so not needed. 2 off hengst oil filters, 1 off hengst fuel filter, 1 off fuel pre-filter and 0 ring, 1 off gutteman air filter. £20 collected from Nottingham.
Been keeping an eye on a CLK 230 at a local car dealer for a while. On a bit of an impulse decided to pop in and see if any deal with my e300d was possible. I made him an initial unrealistic offer and he came back with a deal worth roughly half way between asking price and my offer.
Now a...
There was a rattle from under the bonnet and i thought somethings loose there. Too right! the cast bracket on the PAS pump is cracked at both the mounting bolt holes!!!!
What are my options? will a w210 pump fit as '606 124's are a little scarce? or weld the old one up? or hang out for a ebay...
If anyone's after a w124 e300d 24v, mine's on ebay at £1350. Would offer it to a member for £1250 with the tax disc (worth approx. £120)http://Item number: 200803455155
Not sure if that's a correctly executed link, but the car's found easily enough under e300d's
With the car recently developing a 'knock' from the offside rear, I assumed it likely the rear subframe bushes were the culprits.(advisory at last mot)
Having taken the rear wheel off to check for play in all the bushes and look at making tools up to draw the bushes out, I noticed oil on the...