removal

Hi all, Could anyone let me know, is it possible to remove the interior of a CLK without fault codes? I'm looking to embark on a track car project so would be removing all seats etc to fit a couple of lighter weight seats

Hi, I don't have a workshop manual and I can't find anything on the web. I'd like to remove the inside pillar trim so that I can re glue the vinyl which is now lifting (and cut) following a windscreen replacement. It looks as if the header rail needs to be removed but I can't be sure...

Anyone know how to remove these clips holding the lining on from inside the wheel well? http://i.imgur.com/2dKMFAI.jpg

Taken out 12x head bolts, the head is loose, and I can lift it 1/2 inch or so, but something is holding it at the rear. Seems like a thin steel tube is attached to the head (like a brake or fuel line) at the back, near the exhaust manifold. I need primarily to know how to remove it, and...

Hi all Does anybody know how to remove the electric seat switches on the door panel, I have an a207 E350 cab Thanks so in advance

Looking to be able to hear a little bit more from that lovely V8 so took my car to my local exhaust centre for a chat. I didn't want to remove the secondary cats so got a quote of £70 to remove the middle box and replace with a section of stainless steel pipe. Thing is, he reckoned it wouldn't...

Firstly, Ey up ow yer diddlin:thumb: I'm about to pick up a c220 CDi in a couple of days and I'm curious about getting the boot badges off. Are they just glued on? Tia and I'll see you later for a better intro.

Hi, Does anyone know how to remove the 3rd brake light at the top of the rear window on a 2009 ML350? The screws seems to be in a very difficult position to get a torx driver in! Thanks in advanced for any tips!

Hi I need help/instructions for removing my 3rd brake light, on my 2007 E class estate, I have water leaking in from it, and advice on resealing or replacement. I have already removed lower inner panels, to determine the water ingress. Thank you John for any help/:crazy:

Stuck with another problem now.... i have 1 bolt left to remove before i can take off the timing chain cover but its underneath the guide rail and it wont budge. How do you remove the rail so i can get to the bolt?? Any help much appreciated!

2006 C Class C180 Kompressor Classic SE Auto Is there a knack to removing a wheel cap ? I'm having a bit of difficulty. I've seen a clip on youtube with a guy using a what looks like a scraper to prise off the cap but I'm having no joy with that method. Also, is there a dealer out there that...

Just thinking of maybe taking the interior wood trim off the car and changing it by either painting or wrapping. I can handle the main dash and inserts on the doors but was just wondering if anyone had a guide to removing the centre armrest wood surround or if it was indeed possible?

Hello every body; I need to change the Voltage regulator on alternator of my W203 C220CDI Coupe Sport (2002). Is it possble to remove it without removing the alternator? In advance thanks for help

Hi all Becker Mexico cassette electronic 837 I have had my 500SL for seven years and have never had the radio on as I don't know the code Can anyone help ?? I don't know how to remove the radio to get to the serial number with which I could the Google for the code Any ideas ?? Cheers all

It has been 4 years since I last logged on, so it is like a new beginning. Please can anyone tell me how to remove the offside rear panel interior adjacent to the rear light cluster as i need to renew my old light for a new one. The nearside looks quite simple but I cannot figure out the offside...

The sliding cover of my centre console doesn't spring closed without assistance. I want to remove it to clean/inspect. Does anyone know how to remove? Presumably there are some clips somewhere?

Hi I have just bought a 2006 facelift SL and want To upgrade from bulbs to LEDs. I have the new led lamp holder But the instructions are in German ! Does anyone know how I can remove the old lamp holders ? Many thanks

Hello, I have managed to wrap a load of sheeting around my prop shaft which subsequently stalled the engine (excellent!) Having disconnected the prop from the diff the sheeting is still wrapped around where the flange inserts into the diff. I will need to remove the flange to clear all the...

I've bought a carbon gear knob for my SL but I've no idea how to fit. Anyone replaced one? Cheers

Hello all I was going to take the number plate mount off the from of my new CLS but what is best to plug the holes up Thanks