Hi all - first post despite being a 5 year old member!
After some wheels for my 560SEC Zender, I currently have 17" amg wheels from a 90s vehicle which I'd consider a px on?
Based in Leicester but happy to travel!
Any offers?
Thanks :)
Hi Guys
I need some advice i have a set of Rial f1s the size off wheel is 8.5 x 17 and
off set is 29.
What size spacer do i need.
These are going on a 83, sec ,380.
Many thanks digitaldread
Hi guys,
My boss is looking for a silver w126 sec for a film job next wednesday. As far as I know it would be parked on a driveway in the back of shot. If you're interested call Stewart on 07973 400245 for more details.
Cheers
hi
just wanted to know when is best to replace the timing chain a 560 sec has 124k on the clock.
I have had the car fully serviced a few weeks ago, but was wondering whether i should have timing chain replaced now or not? what are the signs to look out for which suggest the timing chain...
okay,
Had the sls valve replaced today.
Basically the old one wasn't raising or lowering the car. Drove home from work and the seemed harsh, I looked underneath at the valve and the leveling arm was pointing downwards about 30 degrees.
I know It's supposed to be parallel with the sway bar...
Mercedes-Benz 500 SEC
163,000miles.
The best and most desirable colour combination: 040 Black with 265 Cream/Beige leather upholstery.
Extraordinary service history, complete from the order form to the most recent service.
Mechanically A1 with all equipment fully operational...
Posted this in the Classified Ads by mistake.
Nice. Thought red would look pants in the SEC, but it works with that kit.
1988 MERCEDES 560 SEC AMG AUTO RED | eBay
Hi,
Just noticed fuel dripping from the hose situated next to the fuel pump. The one that points downwards, kind of looks like an overflow pipe.
Any ideas?
Hi
I have a 1988 420 SEC, she runs fine :confused:for about 2 minutes at 1000 rev idle then slowly dies at about 500 rev. Any suggestion? Fuel pumps / Relays?
If i put my foot down it struggle to maintain a constant rev count. When I put it into drive, the rev drop off, I then have to pump...