Anyone know if a LHD TB will work on a RHD car? I can get a fairly cheap 82mm TB from the states. Just wondering if it will work and if any modifications need to be done to make it so.
Can't seem to find them less than £320 (new) here. But can get one for about £100 (used) from US. Can't...
Engine oil cooler in our ML250 (reg 2015) was found leaking oil. When the car was brought to the dealership additional problem was diagnosed. Namely
"... and also found the throttle valve actuator seals also leaking oil" I am not a mechanic, but what oil should be doing near throttle valve /...
Hi,
At the start of a restore project. My first Benz.
Picked up a 2001 W208 CLK430 which has potential to be made good once again.
It has had a bad 2nd set of cats removal - I will build a stainless system in the next few months.
A few questions
OBD2 reader - can anyone recommend...
Any ideas please ..... (2007 CL63 AMG) Car drives brilliantly most of the time. When cold no issues at all.
Particularly in hot weather and when car is up to normal operating temperature when you come to a COMPLETE stop at lights or junction and go to move off there is no response from the...
Hi there,
I've noticed that my 5.5TT has a mild to moderate tendancy to surging when on a constant throttle between about 1600 - 1800rpm. It makes the car feel jerkier and less refined than I'd like.
I also noticed that on at least one occasion swapping from Shell to Tesco Momentum made...
Any idea if they are compatible???
Need a new s/h TB and hard to find a 430 one that isnt stupid price... but easy to find a 320 one around £30
Also are the injectors the same???
Im doubtful that they are the same... but you guys seem to know what i dont so thought i would ask!
Suns...
Could some kind person with EPC access find the time to look up the throttle body part number for my '94 SL? The VIN is WDB1290672F103359.
Thank you in hope and anticipation...
Good evening gentlemen.My car has a real slack spot on the throttle,it goes away down before anything happens,then does not have the feel that i think it should.I have looked under the bonnet at the cable to electronics,and there is adjustment to be had on the cable.But i am wondering if the...
Havng a route around and noticed one of the retaining clips have been broken sercuring the Intake Y pipe to throttle body.
So if you have a undamaged one for sale please pm me.:thumb:
Maybe someone in this forum can help me.
I think I have some problems with my Throttle body my E320CE.The idle speed and 5 th gear is not stable.
What is the different between throttle body nr 000 141 49 25 and nr 000 141 91 25?
Are they compatible?
Br
Ove
Can anyone tell me where the throttle body is on a 2009 c220 Cdi (651 engine?)
Also, is there a way to test it? Have been getting a Charge Movement Flaps Bank 1 code which I've been told is the Throttle Body...
Would be nice to test before weighing out for a new one..
Hi,
Does anybody have a wiring diagram for the throttle position sensor. Im getting an error (P1222). This doesnt normally cause a problem but just occasionally i jump to limp mode normally just when i dont need it!
I have already changes the sensor, cleared the code but it came straight...
my 2004 c220 cdi has just blown the air pipe below the throttle body off at the joint.there is a fair amount of oil dripping from the body itself and down the pipes anyone any idea where it will be from.also the engine management light came on and when plugged in to a obd,code 2025 it said...
Anyone with a c63, a eurocharged map and a obd Bluetooth scanner? If so do you know the percentage the throttles open after the map? Compared to what they open standard. Reason I ask is mine is mapped but not a eurocharged map. I would like to see if there is much difference in how much my map...
I have a c200 auto and I've had my foot all the way down on the accelerator and it takes about 4 secs for the engine to register it and then pull away, anyone help at all?
Thought this might be the best place to ask (in as much as I believe it to be working as designed).
I know the throttle on the 208 CLKs go from mechanical to electrical, but as much as I love the car the 'pedal in a pillow' effect somewhat dulls the experience, most notably whilst moving away...