w114

Am looking for M110 280 engine in good working condition

Hi all, The madness continues. I have in my possession yet another 1969 W114 250CE. The current engine is shot. I want to install a Diesel engine to run Biodiesel. I am looking for an everyday car. Doing about 80 miles a day. I am hoping the simplicity of older running gear is going to give...

I am restoring a 71 W114 280CE with 69k on the clock. It has the Bosch D Jetronic system, and wont cold idle. Starts no problem, will idle when reaching normal temp and is ok warming up if you keep the throttle pressed to a fast idle. When warm idle is managed ok when engaging auto drive...

Hi all. I'm looking for both front wings, both rear lower wings and a rear vallance. Found a couple of websites that list these panels for the saloon but don't know if they're used for both. I'm guessing that at least the lower rear wings are different. Any body know where I can get these body...

hi guys i have quite abit of parts for sale for a w114..... iv got a good set of front double stacked chrome bumpers..just need a good polish i have around 6 doors with windows in them i have another double stacked bumper but with a piece missing,could be used as a single chrome bumper rear...

Guys need ur help...I just brought a w114 and it's been running fine,today I washed it,and there's a few knobs in the car which I dnt knw the function off,,,I messed about with them and now it dnt start,,it try's to turn but dnt fire...I can smell fuel,got the feeling I have flooded it,,,but I...

Long story short I had mine shotblasted and it expanded by 10mm so I need a replacement, any will do as long as its from a saloon.

Mercedes Engine W114 280CE Straight Six | eBay UK

Found some pictures of the old coupe, thought id share them. This was just when i had it lowered some 4" and had a hand made stainless steel exhaust made for it. Makes me want to buy another.

Afternoon all, I'm looking for some steel wheels to fit my W123 280CE. I'd prefer the more solid design, with 4 slots (I believe shared with the W114/115) rather than the version with lots of round holes. I can collect if close-ish to Brighton, otherwise I'd want them sent, in which case...

Hi I have a 1972 W114 250CE that refuses to start. When I turn the key it starts for a second or two then stalls. Petrol pump runs, petrol pump relay is ok. When the ignition is on, the fuel pump used to run for a second or two to prime then stop until you start the engine but now, when the...

Hi all, Need floor pans for W114 1972. Hadrian cannot supply floor pans. Do you know of anyone else who might? Thanks

Hi to all and many thanks to the site owners for all that's here. I have a 1972 250 saloon its in like new condition with 57k genuine miles on the clock. I'm up for tuning my carbs so the set up is just right. Can any one please help? Dose any one have the factory setups for the carbs. The...

being broken right now most parts avail specially mechnical parts, front wings bumper bonnet 1 door. pm your requirement before it get shipped overseas

a friend has very tidy 250 w114 P reg 4 door, the car has rust in wishbone and suspension and is considered beyond economical repair. it is beige in colour, engine and gearbox are fine, chrome is very good including bumpers, lights etc all good down to steel wheels and hub caps, wings are fine...

Hi there, i have some serious rust developing around the top shock mounts on my 73 280 coupe, well more like big holes and rot! Does anyone know of any suppliers for repair panels or new wings and has anyone had any experience in replacing these? Thanks

W114 280 CE window seals Im looking for some rear window seal/scraper strips form my 73 coupe and i havent had much look searching the web and i was hoping someone on here might be able to help? Thanks

W114 280 CE window seals Im looking for some rear window seal/scraper strips form my 73 coope and i havent had much look searching the web and i was hoping someone on here might be able to help? Thanks

One of my glow plugs has died on my 240D, these are the old series wired glow plugs so when one goes they all go. I am having some trouble getting hold of a replacement quickly so i wondered if it would do any damage if I missed the dead one out when I put the wiring bars back. Anyone know if...

Does anyone know any good not too expensive bodywork restorers in the leicester/Midlands area?