99 E300TD Avgrd - Parts Quote

Discussion in 'General Discussion' started by RodgerDodger, Jan 12, 2009.

  1. RodgerDodger

    RodgerDodger Hardcore MB Enthusiast

    Messages:
    170
    Joined:
    Jun 8, 2008
    Location:
    Scotland
    Car:
    99 - E300 TD - W210
    I recieved the following prices today from the dealer via e-mail:

    "Mr …………
    Please find below the prices for supplying parts only as requested :-
    • D/S A-PILLAR - £19.90 inc vat
    • D/S/F INTERIOR DOOR TRIM - £52.79 inc vat
    • FRONT SPRINGS - £58.65 inc vat each
    • REAR SPRINGS - £60.95 inc vat each
    • FRONT SHOCK ABSORBERS - £100.63 inc vat each
    • REAR SHOCK ABSORBERS - £108.68 inc vat each
    • CENTRE ENGINE UNDERTRAY - £56.70 inc vat
    • FRONT ANTI ROLL BAR BUSHES - £5.29 inc vat each
    • FRONT ANTI ROLL BAR LINKS - £8.34 inc vat each
    • ENGINE MOUNTS - £79.35 inc vat each
    • FRONT PADS - £59.85 inc vat
    • FRONT DISCS - £60.95 inc vat each
    • REAR PADS - £47.66 inc vat
    • REAR DISCS - £41.63 inc vat each
    • REAR SUBFRAME FRONT MOUNTS - £59.23 inc vat each
    • REAR SUBFRAME REAR MOUNTS - £45.54 inc vat each
    ALL PARTS NEED TO BE ORDERED AND PRE-PAID

    • CARRY OUT SERVICE - £351.91 inc vat
    • CARRY OUT GEARBOX OIL & FILTER CHANGE – £175.78 inc vat"
    Maybe i need to rationalise my new years wish-list!! :( -
    I think my first priorities will be:

    Front Springs
    Front Brake Discs and pads
    Engine Mounts
    ARB - bushes and links

    Before i place an order for the parts, can anyone give me some pointers on the above costs - are they reasonable?
    Any comment on the Service and ATF change quotes would be apprecaited:)

    thanks in advance
    R
     
  2. NicDale

    NicDale Hardcore MB Enthusiast

    Messages:
    304
    Joined:
    Jan 16, 2005
    Location:
    Wales
    Car:
    '91 190E 2.5-16V
    Why do you need new suspension springs?
     
  3. Dieselman

    Dieselman Banned

    Messages:
    34,206
    Joined:
    Jul 13, 2003
    Car:
    Peugeot 403 Convertible
    Because they go soft and break. No-one notices the softness until they replace them.
     
  4. OP
    OP
    RodgerDodger

    RodgerDodger Hardcore MB Enthusiast

    Messages:
    170
    Joined:
    Jun 8, 2008
    Location:
    Scotland
    Car:
    99 - E300 TD - W210
    As DM says +:

    The Front O/S is broken - only 4' at the bottom - its been like that for 2 YEARS! :eek:
     
  5. Dieselman

    Dieselman Banned

    Messages:
    34,206
    Joined:
    Jul 13, 2003
    Car:
    Peugeot 403 Convertible
  6. Druk

    Druk Administrator Staff Member

    Messages:
    5,309
    Joined:
    May 28, 2004
    Location:
    Not far from Edinburgh.
    Car:
    2011 S212 E350CDi. 1981 R107 300TurboDiesel.
    5th July invoice..W211 front discs from main dealer not far from me;)

    List..£52.24 each = £104.48....discount £41.40..total £62.68 + vat. FOR TWO!
     
    Last edited: Jan 12, 2009
  7. NicDale

    NicDale Hardcore MB Enthusiast

    Messages:
    304
    Joined:
    Jan 16, 2005
    Location:
    Wales
    Car:
    '91 190E 2.5-16V
    £120+ vat for H&R Cup springs (front and rear) for a W210 - Click

    Obviously you probably will need shortened shocks.
     
  8. OP
    OP
    RodgerDodger

    RodgerDodger Hardcore MB Enthusiast

    Messages:
    170
    Joined:
    Jun 8, 2008
    Location:
    Scotland
    Car:
    99 - E300 TD - W210
    That is a very helpful link at the Top DM - great photos, write-up and the website link is .....well.....ESTUPENDO!!! have a narna:bannana: :D
     
  9. OP
    OP
    RodgerDodger

    RodgerDodger Hardcore MB Enthusiast

    Messages:
    170
    Joined:
    Jun 8, 2008
    Location:
    Scotland
    Car:
    99 - E300 TD - W210
    Thanks
    Discount?? what discount - was it a promo offer??

    just wondering, the prices they have quoted me are 'inc' :confused: - does this mean VAT is already included?? - will phone and check tomorrow
     
  10. NicDale

    NicDale Hardcore MB Enthusiast

    Messages:
    304
    Joined:
    Jan 16, 2005
    Location:
    Wales
    Car:
    '91 190E 2.5-16V
    Yup VAT included.
     
  11. OP
    OP
    RodgerDodger

    RodgerDodger Hardcore MB Enthusiast

    Messages:
    170
    Joined:
    Jun 8, 2008
    Location:
    Scotland
    Car:
    99 - E300 TD - W210
    Thanks NicD

    not thinking of lowering - just looking keep original height - good link:)

    What about the Bilstien B6 shocks on that website - just wondering if they are OE and how do they compare with Bouge?

    96 quid is close to the dealers price so would probably just get them from the latter - just wondering if the dealer is quoting Bouge or Bilstien - another dealer question tomorrow:eek:
     
  12. Dieselman

    Dieselman Banned

    Messages:
    34,206
    Joined:
    Jul 13, 2003
    Car:
    Peugeot 403 Convertible
    The dealer will be quoting Boge dampers as they are the OE.
     
  13. OP
    OP
    RodgerDodger

    RodgerDodger Hardcore MB Enthusiast

    Messages:
    170
    Joined:
    Jun 8, 2008
    Location:
    Scotland
    Car:
    99 - E300 TD - W210
    OK, plan for my current short list (the big list is still valid)

    Front & Rear Springs and ARB Bushes & Links will be ordered from dealer tomorrow

    Discs - will probably get them from dealer too but will do some more research first for best price deal (Nicks site looks good tks DM)- i think the Pn for the Fronts is A210 421 1712? - Rear ?? - can anyone confirm please

    Pads - maybe not get them from dealer and will look at alternatives -more research needed - Mnaufacturer, Pns. etc

    Engine Mounts - maybe from dealer but again Nicks site looks good value - after looking through the posts, Pns. i have for left are A202 240 2817 updated to A203 240 0617 - and Pn. for Front Right??? could be A202 240 3017:confused: - can anyone confirm these please

    Thanks guys - will post-up my findings as i tick things off the list/s:)
     
    Last edited: Jan 12, 2009
  14. Dieselman

    Dieselman Banned

    Messages:
    34,206
    Joined:
    Jul 13, 2003
    Car:
    Peugeot 403 Convertible
    Yep, that is correct for the mounting.
    Rear disks are A210 423 0612
    Fronts are A210 421 2212
     
  15. OP
    OP
    RodgerDodger

    RodgerDodger Hardcore MB Enthusiast

    Messages:
    170
    Joined:
    Jun 8, 2008
    Location:
    Scotland
    Car:
    99 - E300 TD - W210
    phweeew - that was quick

    tks again DM :rock:
     
  16. coupe deville

    coupe deville Hardcore MB Enthusiast

    Messages:
    786
    Joined:
    Aug 21, 2008
    Car:
    93 E320 coupe sportline facelift
    So is mine, having both fronts replaced at 124 works on Friday
    Milk and I sugar Ian
     
  17. NicDale

    NicDale Hardcore MB Enthusiast

    Messages:
    304
    Joined:
    Jan 16, 2005
    Location:
    Wales
    Car:
    '91 190E 2.5-16V
    At the same price would the bilstiens be a better bet than standard ones?
     
  18. Dieselman

    Dieselman Banned

    Messages:
    34,206
    Joined:
    Jul 13, 2003
    Car:
    Peugeot 403 Convertible
    That depends on what you mean by better. The manufacturing quality is unlikely to be better and Bilstiens tend to be a bit more brittle in ride quality than Boge.
     
  19. OP
    OP
    RodgerDodger

    RodgerDodger Hardcore MB Enthusiast

    Messages:
    170
    Joined:
    Jun 8, 2008
    Location:
    Scotland
    Car:
    99 - E300 TD - W210
    Update

    my wallet is 400 quid shy!!:( and ....i decided to get the Engine Mounts while i was at the dealers!!

    some useful mixed part numbers and costs on the invoice- will post up later

    Now ....brake discs and pads -should maybe start dedicated threads in respective forum sections as i move through my NY list :cool: PS: manged to get a wee 10% discount on the parts shown in e-mail quote above (excluding Engine mounts)
     
    Last edited: Jan 13, 2009

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.