Beading rain

[Norte23]

Well car washed. Dried. R222 applied & buffed. Now to try this Fusso coat soft 99 you all got me to buy hahaha

 

[Toobad]

Remember a coating of sealant is only a couple of microns thick at best. If you slather it on you will just end up making work for yourself when buffing the surplus off. Think of it as applying Fusso fumes. To do the entire bonnet you will only need to load the foam applicator once. Work a panel at a time allowing 15minutes to cure before buffing. Being PTFE-based, it is pointless applying a second coat because it will not adhere to the cured sealant. Luckily the same applies to dirt. The gloss should be immense on Obsidian Black so post up some finished pics in a new Fusso Coat thread to make us all jealous.

 

[Norte23]

Hahaha it's your fault I'm doing this. Bought a pretty expensive power polisher for the buff stage. Won't use it to apply with though as that would spoil the fun. Bonnet & roof done so far. Looking good.

 

[Norte23]

The neighbours looking at me stupid because I have a giant detailing tent round my car hahaha. Another new purchase due to something you said hahaha

 

[Nurburgsingh]

Love a bit of beading. I'm a big fan of dodo juice products and their Future Armour is awesome!!

 

[A250 Bennyboy]

Gave my car a final seal of sonax BSD for the winter months, it's had 4 coats now.



For a silver coloured car I have quite a deep shine now


Pictures don't do the shine justice really

Came across a stone chip on the lip of my bonnet

And a bead shot

Cheers
Ben

 

[uumode]

Looks very slick and shiny.
Nice highlights.

Think it's better than my silver car.

 

[jr2007]

Following a full detail (clean, clay, compound and polish), I got some Soft99 Kiwami on the car...

 

[A250 Bennyboy]

Early morning Cornish mist

My car covered in Cornish mud

My Gaff for the next 7 days

 

[A250 Bennyboy]

My Wi_Fi messed up lol

 

[A250 Bennyboy]

Muddy bugger

 

[A250 Bennyboy]

 

[A250 Bennyboy]

Early morning sun and bead

 

[A250 Bennyboy]

Damp morning and low winter sunshine

 

[A250 Bennyboy]

Cleaned mine and the wife's car today


De-badged my wings and boot

The wife's car Ford Fiesta


After I'd washed them both I towel dry with micro fleece and gave both of them a coating of Sonax BSD
Cheers
Ben

 

[Mrhanky]

Looking very nice. I was a convert to Sonax this year via this forum.

Overall BSD is great all rounder. My favourite for deep shine is poor boys detailer but it's hard work to use in anything but warm weather. Therefore BSD tends to be my go to product.

The Sonax nano glass is another great product that gets used in the home as well.

 

[Alex225]

The Collinite/Extreme Elements combo still holding up through winter...

Not beading as it did in the first 6 weeks or so but still doing its job!

 

[A6lns]

Mine is still beading but not as much been probably a good few months when I last waxed it


Sent from my iPad using Tapatalk

 

[KeithJG]

I am still not convinced

Mine is still beading and i do nothing to it.......kept in the open all the time.

 

[A6lns]

Not convinced on what ?


Sent from my iPhone using Tapatalk