Stirling Must
New Member
- Joined
- May 3, 2015
- Messages
- 3
- Car
- Mercedes E250 CDI Sport Estate
I am going to replace the front camber and caster arm bushes and rear springs on my wife's W203 220CDi during the next couple of weeks - weather permitting! My question is, is there a torque setting for the bolts that pass through the bushes, if so, does anyone know what it is? I was going to say something about beating about the bush and hope springs..... will fit themselves but couldn't think of anything witty! I know, I'm all torque!
As a matter of further interest, I also need to fit a new drivers side interior grip rail (aka a door handle to me) a front fog lamp (courtesy of a stone) and a bonnet badge courtesy of...... Still, we've only lost 3 bonnet badges in 23 years of Merc ownership, not bad considering badges are not an endangered species round these parts!
Any tips and advice gratefully received.
As a matter of further interest, I also need to fit a new drivers side interior grip rail (aka a door handle to me) a front fog lamp (courtesy of a stone) and a bonnet badge courtesy of...... Still, we've only lost 3 bonnet badges in 23 years of Merc ownership, not bad considering badges are not an endangered species round these parts!
Any tips and advice gratefully received.
