Comad APS engineering menu "error history"

[simppa80]

I have updated my comand aps. Car is -04 W203. Before update i could go to engineering menu. Not anymore after update. Is it possible see Comand error history by some other way than eng.menu?(Star). Is it posible update comand to v10.0 -> older (examble V6.0) that eng.menu works again and i could see error history again?

 

[richard]

When on MAP display, hold down NAV and 5 keys for a while (it will beep, keep holding)

That gives you a load of stuff - can't recall if the error list is there

As you have DVD comand in W203, technically your car is Model Year 2005

Richard

 

[simppa80]

When on MAP display, hold down NAV and 5 keys for a while (it will beep, keep holding)

That gives you a load of stuff - can't recall if the error list is there

As you have DVD comand in W203, technically your car is Model Year 2005

Richard

THANK YOU! I will try it today.

 

[simppa80]

Try it. Won't work. Just beebs and then nothing. Must there be working map inside?
I don't have.

 

[richard]

Hold for about 10 seconds after the beep. You need to have a working disk in it otherwise it keeps going out of that mode to tell you to insert a map.

R