• The Forums are now open to new registrations, adverts are also being de-tuned.

COMAND in W208 CLK?

Ryan S

Member
Joined
Jul 4, 2006
Messages
46
Location
Aberdeen
Car
CLK 320 Cabrolet Elegance
Hi,
I'm after a little bit of advice and any comments would be very helpful.

I have the chance of picking up a COMAND unit c/w anntena etc. for my 2000 W208 CLK.

I think it's out of an E class and the part number is A210 820 51 89

Will this unit for my car and will I still be able to use my wheel for the radio / CD changer. I have the Audio 30 at the moment.

Can anyone see any problems retrofitting?


Thanks,
Ryan
 
Ryan S said:
Hi,
I'm after a little bit of advice and any comments would be very helpful.

I have the chance of picking up a COMAND unit c/w anntena etc. for my 2000 W208 CLK.

I think it's out of an E class and the part number is A210 820 51 89

Will this unit for my car and will I still be able to use my wheel for the radio / CD changer. I have the Audio 30 at the moment.

Can anyone see any problems retrofitting?


Thanks,
Ryan
Yes it should work. however, you will need a loom adapter, mounting plates and an antennae.

Personally I always recommend people go for one of the following part numbers if fitting into a CLK;

A208 820 44 89
A208 820 40 89
A210 820 56 89
A210 820 54 89

Make sure you apply the MY01 update which is already applied on the 44 89 and 56 89 models.

Take a look at my HOWTO in the howto section to see what fitting it will be like.
 

Users who are viewing this thread

Back
Top Bottom