Comand NTG 2.5 HELP!!!

[MTB-C63]

Hi,
I have a 62 reg Mercedes vito van with and Audio 20 head unit in it.
I have now upgraded the head unit to a Comand NTG 2.5 which is brilliant,
I also upgraded the speakers as the stock one are a rubbish, they are all wired in and sound great!
I have also bought a active subwoofer this is where the PROBLEM lies! I have absolutely no idea how to wire this in and where to wire it to???

Any help would be appreciated?

 

[zenman63]

There is no sub out so it has to be hi in and it can be wired across the rear channel.
I would go down the Focal seat sub, it will come with wiring instructions.
Another option is get a hi in amp with a sub out or use the rear channel as a sub.
Active subs will take a wire from both rear channels but you will have little control.
It all comes down to what you want to spend.

 

[MTB-C63]

Thanks for replying after reading a previous post on a similar thread I took the advice and bought the 5.25" focal K2 speakers which are well worth it!
How ever instead of the focal sub I happened to have a Kicker hS8.
So if I connect the two sub inputs to the read speaker out puts of the head unit with that work?
Is the rear speaker output in the big block at the back of the head unit or separate?

 

[zenman63]

That big block is called a quadloc and if its wired yes from there.
I would look at the wiring for that sub you have before connecting.