iPod nano cannot recognise in my C200 CGI (2010 Jpn Spec)

[bobven]

Hi all,

I have a Japan Spec C200 CGI year 2010 fitted with Command APS single DVD system. I have the MB part cable for ipod integration which I found the port in my glove box. I connected the cable, connect my ipod nano to it. I couldnt see that in my display or not even recognised. Any advise why?

I have the original ipod integration cable hooked up to the port inside glove box and I use original apple interface for big to lightening connection on ipod / iphone 5'

Please advise what's wrong and how to rectify this.

Thanks in advance

 

[brucemillar]

Well if it like my C55? You will not see it in the display. You have to hit the Audio Button twice then you will see "Aux" hit that soft key and you can play your toons. However you will not see track listing etc.

 

[bobven]

Well if it like my C55? You will not see it in the display. You have to hit the Audio Button twice then you will see "Aux" hit that soft key and you can play your toons. However you will not see track listing etc.

Thanks bro...

I hit the audio button.. I see radio/CD only. Media interface is locked... I use original MB interface cable. But to connect to ipod nano (newest) I use apple converter for big to lightening pin....

Any screen shot would be helpful

 

[brucemillar]

On mine I just plug the iphone/ipod into the jack in the glovebox. When I hit audio button once I get Radio. Hit Audio again I then see Aux. That's as much as I know.

 

[npuk]

Just to verify your media interface works and you have the correct cables (there are 2 types) try the aux or usb media interface cable with something.