- Joined
- Feb 8, 2010
- Messages
- 2,409
- Location
- Warwickshire
- Car
- 2016 L450 Range Rover 4.4 AB, 2015 GTs 2017 Range rover evoque
Still have the problem with the wives 200K M271.
I have had the head and done all the valves, new sprockets and chain etc and I get the p0010 code.
I have had the cover off twice and the timing marks are 100% on both sprockets.
open circuit, does anyone know where the wiring goes to check continuity of the cam magnet wiring?
I have had it on Star and can change the exhaust timing plus and minus but cannot move the inlet at all, swapped the magnets and the same.
Any help guys please.
I can put the light out but is back in 10 min's
I have had the head and done all the valves, new sprockets and chain etc and I get the p0010 code.
I have had the cover off twice and the timing marks are 100% on both sprockets.
open circuit, does anyone know where the wiring goes to check continuity of the cam magnet wiring?
I have had it on Star and can change the exhaust timing plus and minus but cannot move the inlet at all, swapped the magnets and the same.
Any help guys please.
I can put the light out but is back in 10 min's
