merc part number needed

Page may contain affiliate links. Please see terms for details.

SPS

Active Member
Joined
Jun 2, 2002
Messages
65
the car is a 1997 c200.

what is the part no. for an original merc waterpump for this car?
 
very likely to be the same as the 220 engine one - which is 111 200 40 01

i only have the yank epc which does not list the 200 engine... smallest is the 220
 
miro said:
It needs a VIN number.
.

thanks,

the vin number is "Now Removed as Part Found.
 
Last edited by a moderator:
guydewdney said:
very likely to be the same as the 220 engine one - which is 111 200 40 01

i only have the yank epc which does not list the 200 engine... smallest is the 220
.

thanks,

was the number previously 111200 0401,which has now been superceded to 111 200 40 01?
 
miro said:
That is correct. It is now 111 200 40 01
.

thanks,as i used the 0401 number to source awaterpump from febi.

febi part no 05377

pump should arrive wed.
 
Last edited:
SPS

Now that you have found Part, I have removed your Vin Number as this may be misused by unscrupulous persons. In future may I suggest that such sensitive info is sent by PM .
 
Brian WH said:
SPS

Now that you have found Part, I have removed your Vin Number as this may be misused by unscrupulous persons. In future may I suggest that such sensitive info is sent by PM .

thanks for doing that.
got to be careful in future.
lesson learnt!
 

Users who are viewing this thread

Back
Top Bottom