Bonnypitlad
New Member
Hello
I have error code P025113 “The output for the Quantity Control Valve has an electrical fault, there is an open circuit “
Vin WDB9066352P53562
I’m using Icarsoft MB V2.0 diagnostic tool
I’ve searched this forum for “P025113”...no results found
Does anyone have experience of resolving this issue
The check engine light is constantly on and the van seems to be now in “ limp mode” ie very low power and doesn’t rev above 2000rpm
I googled “ P025113 Mercedes “, there’s an interesting article from Lou Polomino on justanswer.com
It seems it’s not a mechanical fault, more likely faulty circuits
I’ve checked that fuse no. 6 is OK
There’s no obvious damage to the wiring ( a visual check)
Part of my problem is that I’m not sure where the quantity control valve is located
A photograph would be helpful
Also any advice on wiring colour codes for a 2017 Sprinter to check with a multimeter
I’d appreciate any help
I have error code P025113 “The output for the Quantity Control Valve has an electrical fault, there is an open circuit “
Vin WDB9066352P53562
I’m using Icarsoft MB V2.0 diagnostic tool
I’ve searched this forum for “P025113”...no results found
Does anyone have experience of resolving this issue
The check engine light is constantly on and the van seems to be now in “ limp mode” ie very low power and doesn’t rev above 2000rpm
I googled “ P025113 Mercedes “, there’s an interesting article from Lou Polomino on justanswer.com
It seems it’s not a mechanical fault, more likely faulty circuits
I’ve checked that fuse no. 6 is OK
There’s no obvious damage to the wiring ( a visual check)
Part of my problem is that I’m not sure where the quantity control valve is located
A photograph would be helpful
Also any advice on wiring colour codes for a 2017 Sprinter to check with a multimeter
I’d appreciate any help