Captain Peacock
Active Member
- Joined
- Nov 4, 2004
- Messages
- 91
- Car
- E320 cdi Avantgarde
having lots of problems with the bulb out warning light coming on. On noticing fault on the brake lights, my o/s was coming on well after the centre and n/s plus it seemed to be dimmer than the other side
Tried swopping, bending bulb holder contacts to no avail, so thought the problem was on the circuit plate
I removed the 4 nuts, removed the lamp and holders this is what I found, contact had burnt hole in circuit plate, see pic, red arrow, made repair by cleaning up then got some solder into the hole.
Tried swopping, bending bulb holder contacts to no avail, so thought the problem was on the circuit plate
I removed the 4 nuts, removed the lamp and holders this is what I found, contact had burnt hole in circuit plate, see pic, red arrow, made repair by cleaning up then got some solder into the hole.
