JOHNO978
Active Member
Ive not posted for a few months as that Damned Covid put me on my back , even though I have been Shielding, I didnt manage to do the Front suspension .. But I will be doing it in spring when I hope to feel much better, I steam cleaned the underside at the front and found that everything was ok, just covered in gunge, The wheel bearings were a bit suspect so I changed those along with the front Dust shields, Discs and pads, that saves me a job next spring. It was due its MOT on the 11th Dec after getting the 6 month extension, Well it passed but with 1 advisory ... Passenger side wiper blade not clearing properly, they are new blades bought for the MOT, all I had to do was add a little more tension to the arm with a slight bend and it was fine. The Tester was quite impressed with the work done up to now. When I do the front I will upload pictures as I go along just as I have with the rear, Thank you for all the help, advice and encouragement doing this job... Hope you are all keeping well... and of course Safe.
Regards,
Steve
Regards,
Steve