Require instrument cluster for 2001 S211 E320 Avantgarde

[rascalmaster]

Hi all! in a moment of madness ( while correcting pixellation issues with the 2 small screens) I managed to press and crack the main LCD.

As such I'm after the whole cluster... So that I can replace the whole thing...

This pic was taken off eBay. I saw it today and sent him a message but it had sold; all in 20 minutes!

 

[rascalmaster]

Doh!

S210 E320 I meant!!!!

 

[gibo]

is it the same as clk avantgarde?
I am breaking one what is the part no for your cluster?

 

[gibo]

just noticed it redlines before 5k rpm so it's for a diesel

 

[rascalmaster]

mines for a petrol...
my pic was a sample only.
i believe the part number is MB A 210 540 19 11 Q 05
Cheers

 

[gibo]

I'll have a look tomorrow. lock up is few miles away from my house. there was the usual pixel problem but sounds like you know how to fix that

 

[rascalmaster]

I'll have a look tomorrow. lock up is few miles away from my house. there was the usual pixel problem but sounds like you know how to fix that

Not dead certain about the part number...
But it's or a 2001 Y reg, and that's S211 E320 PETROL
Cheers again!

 

[gibo]

part number on mine is on a sticker a208 540 48 11 q17
sticker also says VDO 110.008.915/033
it also has VDO 87 001 357 b moulded into the plastic on top of the cluster

I can partially see part numbers on back of the 2 smaller lcds the one on left starts with 210. you could possibly just change the individual LCD you broke?

 

[gibo]

everything i can find on google suggests that w208 and w210 clusters are interchangeable/same. check the vdo part number on your cluster as it may be the same as mine

 

[aka$h]

The lcds will be the same on the w208 and w210. There may be some chassis specific coding issues such as tank capacity.

 

[rascalmaster]

thanks akash... if you haven't already guessed- i'm a bit clueless in all matters benz lol

 

[rascalmaster]

everything i can find on google suggests that w208 and w210 clusters are interchangeable/same. check the vdo part number on your cluster as it may be the same as mine

thanks gibo! pm sent...

 

[rascalmaster]

hi guys,

all sorted now, thanks!